This system features high-pressure nozzles positioned for maximum coverage, ensuring thorough cleaning of every surface. The slow, controlled rotation of the cleaning platform, enhances the cleaning process and ensures consistent results.

The cleaner is managed by a user-friendly PLC control system, enabling process customization to meet specific cleaning requirements. With its compact design and reliable performance, the Simplex Rotary Spray Cleaner is the ideal solution for industries such as electronics, precision components, and light mechanical parts.

The post Rotary Basket Spray Cleaner with Electromechanical Control | ASI appeared first on ASI Technologies.

Equipped with CeramTec ultrasonic transducers from Germany, each delivering 100W, the system ensures efficient and effective ultrasonic cleaning. Integrated Siemens control modules, IGBT power control modules, and Omron digital temperature controllers enable precise management of heat and cleaning processes, while Schneider low-voltage electrical components ensure long-lasting durability and operational safety.

The cleaner is designed with an internal lifter mechanism for effortless handling of components, making it particularly suitable for applications requiring frequent and efficient loading and unloading. Additionally, Sommy counters monitor cleaning cycles, optimizing operational efficiency and consistency.

This ultrasonic cleaner is ideally suited for a variety of industries, including electronics, medical device manufacturing, and precision component production, where exceptional cleaning quality and reliability are essential.

The post Single tank ultrasonic cleaner, with Internal lifter | ASI Technologies appeared first on ASI Technologies.

The system is equipped with high-quality CeramTec ultrasonic transducers from Germany (100W per transducer) and features Siemens control modules, IGBT integrated power control modules, and Omron digital temperature controllers for precise heat management. Schneider low-voltage electrical components ensure durability and safety, while Sommy counters track cleaning cycles for operational efficiency.

This ultrasonic cleaner is perfect for industries requiring high-quality cleaning, such as electronics, medical products, and precision components.

The post Single Tank Ultrasonic Cleaner | ASI Technologies appeared first on ASI Technologies.

Specially designed around a patented filtration system providing high cleaning performance, parts are first immersed into a wash tank where they undergo an efficient but gentle ultrasonic cleaning action.

In option wash tank can be fitted with a patented spray under immersion combining action of a vertical shaking with a turbulent bubbly air flow that allows reaching a high efficiency level. Parts are then transferred into a closed loop DI Water rinsing and are finally dried during a specific dripping stage and then a unique vacuum drying process.

The use of an aqueous product (No flash point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

Simplicity and Flexibility:

• Fast locking stencil, squeegees or PCB holders/racks
• Automatic transfer system
• Rack storage on loading/unloading conveyors
• Up to 12 stencils per hour!!!
• Equipment and Process fully monitored
• No operator supervision
• SPC and/or Traceability in option

The post MB Tech | N29HV Stencil Cleaning appeared first on ASI Technologies.

The post ATRON® DC- cleaning and conformal coat remover from gigs and mechanical parts appeared first on ASI Technologies.

Screen printed solder pastes tend to compact and trap particles into aperture corners and Lead-Free solder pastes, that are less dense, tend to demonstrate this tendency even more.

To clean effectively requires both cleaning chemistry and mechanical agitation. Direct Ultrasonic Contact cleaning is the ultimate way to clean SMT stencils. Employing a 40kHz ultrasonic generator, the single transducer head cleans with great efficiency even in tougher applications such as partially set glues.

• Safe and simple to use
• A typical 3-minute cleaning cycle
• No risk of stencil damage
• Suitable for stainless steel and plastic stencils
• No risk of stencil damage
• Cleans solder paste or SMD Adhesives
• Accepts both foils or framed stencils

The post Gen3 | Gensonic Stencil cleaning appeared first on ASI Technologies.

מערכות ניקוי אולטרסוניות דגם: ASI | SUPERCLEAN 1800-P

The post מערכות ניקוי – אמבט אולטראסוני ASI | SUPERCLEAN 1800-P appeared first on ASI Technologies.

מגוון גדלים של אמבטיות ניקוי אולטראסוני על פי דרישות הלקוח.

לייעוץ והזמנות צרו קשר, נשמח לעמוד לשירותכם.

The post אמבט אולטראסוני ASI | SUPERCLEAN 1800-3S appeared first on ASI Technologies.

מערכות ניקוי – אמבט אולטראסוני דגם: ASI | SUPERCLEAN 1200

מגוון של דגמים בגדלים שונים, של אמבטיות לצרכי ניקוי לחלקי מתכת, ניקוי אולטראסוני המותאם לצרכי הלקוח.

צרו קשר לייעוץ והזמנות, המומחים שלנו ישמחו לעמוד לשירותכם.

The post אמבט אולטראסוני ASI | SUPERCLEAN 1200 appeared first on ASI Technologies.

• Includes 2 standard baskets

• SUI (Spray Under Immersion) in the washing chamber

• Pump and filter integrated in the washing chamber

• Designed for minimal solvent consumption, featuring two independent cooling systems

• Three cooling zones:

  • -30°C in the middle coils

  • +2–5°C in the upper and lower coils

• The bath and all internal parts in contact with the solvent are made of SUS316 stainless steel

• The external structure is made of SUS304 stainless steel, with a painted metal electrical cabinet

Controls and Safety Features:

• Full control via HMI touch screen and PLC controller

• 2 cooling units

• Heating elements: 2 × 750W in the boiling chamber

• Water separator

• Vertical lid closure to reduce solvent evaporation and save material

The post Mono Solvent Degreaser | ASI appeared first on ASI Technologies.

The post ASI | 6L Digital Ultrasonic Cleaner – Memory quick series appeared first on ASI Technologies.

The post ASI | 10L Digital Ultrasonic Cleaner appeared first on ASI Technologies.

The post ASI | 15L Digital Ultrasonic Cleaner appeared first on ASI Technologies.

The post ASI | 28L Digital Ultrasonic Cleaner appeared first on ASI Technologies.

Specially designed to enhance ATRON® SP200, MC200 is based on spray in air technology. Parts are placed into a stainless steel basket, and submitted to the superior cleaning performance of high pressure sprayer. They are perfectly cleaned in just a few minutes. Then follow a spray in air rinsing step in open loop (closed loop in option) that can be done with tap or deionized water. Finally the parts are dried with a high flow hot air drying system. The use of an aqueous product (no flash-point, low VOC content), ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | MC200+ Maintenance Cleaning Equipment appeared first on ASI Technologies.

Cleaning process has three phases

1. Dissolving of contaminants in the cleaning medium (10 minutes)

Contaminants are softened and then dissolved. The contaminations fall off from the surface as a gelatine-substance at alkali technology. The contaminants drift as sediment to the bath ground at alkali cleaners and falls off as flakes at MPC cleaners. This process is accelerated by using of pressure air blasting into the bath.

2. Washing process (10 minutes)

Washing by immersion in the second bath is important for reaching of the optimum cleanliness. For the best washing result is used pressure air blasting into the bath ground. For washing of stencils is recommended DI water, for washing of soldering frames can be used city water.

3. Drying process

The third chamber is equipped as stacker place for natural air flow drying.

P/N58200

The post ASI | Maintenance Cleaning Equipment appeared first on ASI Technologies.

The post MB Tech | MC200 Maintenance Cleaning Equipment appeared first on ASI Technologies.

The post MB Tech | N29 AUTO Automatic Stencil Cleaning appeared first on ASI Technologies.

The post MB Tech | N29SA4 Stencil Cleaning appeared first on ASI Technologies.

The N29  ECO is Stencil Cleaner is specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flashpoint, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N29 ECO Stencil Cleaning appeared first on ASI Technologies.

The post MB Tech | N20 Stencil Cleaning appeared first on ASI Technologies.

Developed to meet the highest requirements in terms of quality and ionic contamination, MB Tech’s immersion process offers a concrete alternative to the ultrasonic cleaning (often forbidden on electronic boards) and to the spray in air cleaning (that often generates shadowing effect).

SUI (Spray under Immersion) technology offers a complete immersion of the cleaning elements, thus eliminating any possible shadowing effect.

With a patented filtration and a closed-loop rinsing process, the NC25 range will allow you to perform high precision cleaning at the lowest running costs.

The NC25 is available in 2 versions adapted to your production volume:

• The NC25 Eco – for small to medium volumes
• The NC25 – for medium to large volumes.

The post MB Tech | NC25 PCBA Cleaning appeared first on ASI Technologies.

Effective cleaning with no damage to the products, absolute minimum of solvent losses, environmentally safe and suitable to various applications

Typical Applications:

• Precision component cleaning
• De-fluxing of electrical assemblies
• De-fluxing of electronic assemblies before conformal coating
• Removal of compounds from medical devices
• Remove oil residue from metal parts

ASI2060-450 is compatible with all of today’s non-flammable halogenated cleaning solvent. Machine equipped with the twin sump and hermetically closed during the cleaning process. The handling system is completely automatic. Two cooling zones reducing the solvent losses to an absolute minimum.

Every process is controlled by PLC and system’s advanced SW allows programming of every stage of the cleaning process according to the specific application requirements. Intuitive user interface and the touch screen making the system very easy to program and operate.

ASI2060-450 is especially effective in most challenging de-fluxing process supporting co-solvent material with the highest Kb value and no risk to component and board damage.

P/N62050

The post ASI | 2060-450 Vapor Degreaser – Advanced solvent cleaning system appeared first on ASI Technologies.

The post ASI | 2L Digital Ultrasonic Cleaner appeared first on ASI Technologies.