The SMART DISPENSE 06 is a professional dispenser for manual applications that require high accuracy and repeatability. These dispensers also allow heating the dispensing nozzle. The all-electronic dispensers use dispensing recipes for storing the application parameter. Thus, the dispensing pressure and the nozzle temperature are automatically set as specified after selection of the recipe. A temperature sensor inside the dispensing pen measures the cartridge temperature. The SMART DISPENSE 06 control unit compensates viscositychange dependent on the material and determines the optimum parameter to guarantee a stable dispensing result. The dispensing recipes can easily be adjusted to new materials and applications, which provides maximum process control to the user. Temperature insulated dispensing pens are available for common cartridge sizes in order to avoid material heating when dispensing by the user. In use of high viscous material viscosity-setting is possible by means of an optional integrated nozzle heater inside the dispensing pen. 1K material from liquid to pasty can also be processed reliably. In use of low viscous material formation of drops on the dispensing needle is avoided by means of manual retain vacuum. Dispensing programs are created, optimized and managed well-arranged on the PC using the software CLEVER DISPENSE Pro.

The post Martin | Smart Dispense 06 appeared first on ASI Technologies.

The CLEVER DISPENSE 06 is a professional dispenser for applications that require highest accuracy and a maximum control of material viscosity. These dispensers allow heating of the dispensing nozzle and cartridge. The CLEVER DISPENSE 06 H DP Sets are designed for manual dispensing operations. The all-electronic dispensers whose dispensing pressure, temperature and retain vacuum are program-controlled use the time-pressure-technology. This allows reliable dispensing of very small dots and lines of liquid to pasty material either as 1K-type or 2K-type. In addition, a sensor measures the material temperature inside the dispensing pen and the control unit compensates the material-specific change in viscosity. You can add your own material to the already existing material library to define essential material parameter and limit values. Temperature insulated dispensing pens are available for common cartridge sizes to avoid that the material is heated by the user during dispensing. If highly viscous materials are used it can be reduced by means of the optional nozzle heater. Dispensing programs are created and managed well-arranged by the Software CLEVER DISPENSE Pro on the PC. A maximum of 25 dispensing programs can be stored in the device and executed from there.

The post Martin | Clever Dispense 06 appeared first on ASI Technologies.

Features:

• Height Measurement System by laser
• Air Stabilizer
• Auto nozzle vacuum cleaning function
• Single Stage Conveyor
• IC Body Recognition
• Valve Temperature Regulators
• Fluid Level Detection & Alarm
• Statistical Process Control
• XYZ Origin Calibration Platform
• Programming method: Online teaching or import from CAD file

Optional:

• Precision Material Weight Calibration System
• Dual Lane Conveyor System
• Substrate Bottom Heating Module
• Valve Rotation & Tilting Mechanism
• Substrate Auto Loader/Unloader
• 3 Stage Conveyors with Substrate Bottom Heating Module
• Dual Valve Structure (Can perform Simultaneous Dispensing of 2 PCB)

The post GKG | D-Sniper | High Speed Dispenser appeared first on ASI Technologies.

• Solder paste, Flux paste, UV adhesive, lubricant, epoxy resin, fast cure adhesive, silicone resin, etc.
• Usage: adhering, fixing, dot coating, line coating, etc.

The post ASI | Dispensing Controller appeared first on ASI Technologies.