Soldering Station - ASI Technologies

Soldering Station TMT-1000S | Thermaltronics

keren many — Mon, 18 Nov 2024 15:37:10 +0000

The TMT-1000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.

Curie Heat Technology operating at 470KHz.
Max flexibility, allows the use of K, P, S Series tips.
Extremely compact, weighs just 0.67KG (1.5LBS) .
Sleep Workstand provides auto tip sleep feature
No calibration or operator training required.
No additional coil assembly costs.

The post Soldering Station TMT-1000S | Thermaltronics appeared first on ASI Technologies.

BATTERY CORDLESS SOLDERING IRON – MSD-40 | ASI

ASI Specialist — Thu, 22 Sep 2022 14:23:54 +0000

LED light allows comfortable soldering in dark or compact places, e.g. car wiring, remote
locations, etc.
Attachment type tip can be replaced without tools. Low-battery lamp prevents sudden
interruption of work from battery exhaustion.
Protective cap prevents accidental switch-ons. Carry in bag or pocket safety. Hole to
attach strap

The post BATTERY CORDLESS SOLDERING IRON – MSD-40 | ASI appeared first on ASI Technologies.

ASI | GAS SOLDERING IRON –GP510

ASI Specialist — Thu, 22 Sep 2022 13:43:43 +0000

Heats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power
of 15-75W with the temperature adjuster.
Optional tip converts it to a hot knife or other hot air tools.
Operates approx. 45 minutes between refills (when used at max. temperature as a soldering
iron).
One-handed, one-touch ignition switch

The post ASI | GAS SOLDERING IRON –GP510 appeared first on ASI Technologies.

Thermaltronics | TMT-2200S Soldering & Rework Station

Keren — Thu, 24 Mar 2022 09:25:47 +0000

The TMT-2200S is based on Curie Heat Technology
which responds to the thermal demands of each
solder joint by adjusting the power instantaneously,
thereby meeting the exact requirements of the
substrate component and solder material.

Dual ports with simultaneous heat up.
High thermal recovery & performance.
470KHz power supply with built-in LCD display.
No calibration or operator training required.
No additional coil assembly costs.

The post Thermaltronics | TMT-2200S Soldering & Rework Station appeared first on ASI Technologies.

ASI | soldering iron tip cleaner

Keren — Mon, 17 Aug 2020 13:20:36 +0000

ASI Soldering iron tip cleaner, to clean the tips from molten solder and contaminations.
The tip cleaner is Made of non-abrasive, soft brass shavings.
No water is required to use with the tip cleaner.
The case is made of heat-resistant silicon rubber, that prevents temperature loss when using it.
Cleans the tip better than wet sponges.
The container comes with a spare pack of shavings.

P/N 54441

The post ASI | soldering iron tip cleaner appeared first on ASI Technologies.

ASI | HOTBAR Pulsed Heat HBR/HSC/ACF Bonding System

kramer.niels — Fri, 22 May 2020 14:18:52 +0000

Realtime temperature and force profile display on the LCD touch screen.
Titanium alloy thermode ensure uniform temperature distribution, fast
heating and longest service life.
Password protection for process and system parameters.
Level mechanism for components co-planarity adjustment.
English / Simplify Chinese / Traditional Chinese user interface display.

OPTIONS

Tape Feeding System (TFS1) for holding silicon or Polyimid (Kapton) tape.
Colour (CC19) alignment module for TAB/flex to PCB/LCD.
Thermal Profiling Unit (TPU1); additional thermocouples for temperature profile monitoring.

The post ASI | HOTBAR Pulsed Heat HBR/HSC/ACF Bonding System appeared first on ASI Technologies.

GOOT | SVS-800AS All in One Service Station

kramer.niels — Wed, 31 Jul 2019 11:53:27 +0000

Omnifunctional machine for soldering, desoldering and reworking.

REWORK UNIT

The temperature can be set to max 550°C.

SOLDERING UNIT

Good for a wide range of soldering work with 70W heater.

DESOLDERING UNIT

Instant desoldering with open-valve mechanism.(Please refer to the next page.)

INDIVIDUAL POWER SWITCHES

Along with the main power switch, there are switches for soldering, desoldering, and reworking.

The post GOOT | SVS-800AS All in One Service Station appeared first on ASI Technologies.

Thermaltronics | SPG-50 Yellow Sponge

kramer.niels — Fri, 15 Feb 2019 12:26:48 +0000

SPG-50 Yellow Sponge – 50 Pack
SPG-5 Yellow Sponge – 5 Pack

Dimensions 8.1cm x 5.3cm x 2.5cm

The post Thermaltronics | SPG-50 Yellow Sponge appeared first on ASI Technologies.

Thermaltronics | Brass Curls 10 Pack

kramer.niels — Fri, 15 Feb 2019 12:15:11 +0000

Thermaltronics Brass Curls 10 Pack are excellent to help maintain your solder tip and prolong the life. The Thermaltronics Brass Curls are recommended to be used with any soldering iron. They are part of the Thermaltronics TMT-2000S and Thermaltronics TMT9000S-2 Soldering Station package.

P/N BC-10

The post Thermaltronics | Brass Curls 10 Pack appeared first on ASI Technologies.

Goot | St-40 tip cleaner

kramer.niels — Sat, 05 Jan 2019 12:21:52 +0000

Goot ST-40 is a soldering iron tip cleaner made of brass shavings.
The container comes with two packs of shavings.

Features

Made of low-abrasive brass shavings.
Cleans the tip better than conventional sponges
No water is required to use the tip cleaner.
The container is made of heat-resistant and slip-proof silicon rubber.
Reduces the temperature loss that occurs when using a wet sponge.
Long lifetime.
One spare pack of brass shavings is included.

P/N 54441

The post Goot | St-40 tip cleaner appeared first on ASI Technologies.

Tweezers | TZ-KIT1 Thermaltronics

zivit.drori — Mon, 04 Jun 2018 10:48:19 +0000

Thermaltronics TZ-KIT-1 tweezers handpiece is ergonomically designed for reworking even the smallest components. Allows locking of both arms and adjustment of tips horizontally and vertically.

Uses Thermaltronics MTZ Series Tweezers Tips.
Dual lockable arms.
Adjustable alignment of tips in x-y directions

The post Tweezers | TZ-KIT1 Thermaltronics appeared first on ASI Technologies.

Thermaltronics | Tip Tinners

zivit.drori — Mon, 04 Jun 2018 10:46:46 +0000

The TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self-adhesive pad on the underside to allow it to be affixed on, or near the work station.

Removes tip oxidation
No-Clean compatible formulation
Minimal residues
Rapidly re-tins badly oxidized soldering iron tips

Thermaltronics TMT-TC-2 Tip Tinners should be used when the soldering iron tip is unable to be re-tinned by using cored solder or normal electronic grade fluxes.
For best results roll or wipe the soldering tip at normal soldering temperature over the surface of the TMT-TC-2 for a few seconds to produce local melting. There is no need to use heavy pressure or a scrubbing action. Prolonged contact may form excessive fume.
The residue on the tip is non-corrosive and may be removed by wiping the tip onto brass curls or a damp (not wet) sponge.

Thermaltronics TMT-TC-2 Tip Tinners are available in containers containing 20g.

P/N TMT-TC-2

The post Thermaltronics | Tip Tinners appeared first on ASI Technologies.

Thermaltronics | מנקה ראש הלחמה אוטומטי

zivit.drori — Mon, 04 Jun 2018 10:45:40 +0000

The TMT-ASTC100 automatic solder tip cleaner helps rework badly oxidized tips. Two high quality brass brushes, which revolve in opposite directions, aid in the removal of oxidisation from the soldering tip.

Removes tip oxidation
Light & compact, takes up minimal benchtop space
Easy to clean and maintain

P/N TMT-ASTC100

The post Thermaltronics | מנקה ראש הלחמה אוטומטי appeared first on ASI Technologies.

Thermaltronics | TMT-9000S

zivit.drori — Mon, 04 Jun 2018 10:44:49 +0000

The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.

High thermal recovery & performance.
56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.

P/N TMT-9000S-2

The post Thermaltronics | TMT-9000S appeared first on ASI Technologies.

תחנת הלחמה | Thermaltronics TMT-2000S

zivit.drori — Mon, 04 Jun 2018 10:41:57 +0000

The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.

Curie Heat Technology operating at 470KHz.
Maximum flexibility, allows the use of K, P and S Series tips.
Extremely compact, weighs just 1.3KG.
No calibration or operator training required.
No additional coil assembly costs.

P/N TMT-2000S-K

The post תחנת הלחמה | Thermaltronics TMT-2000S appeared first on ASI Technologies.

Thermaltronics | Tip Cartridges M Series

zivit.drori — Mon, 04 Jun 2018 10:40:40 +0000

The post Thermaltronics | Tip Cartridges M Series appeared first on ASI Technologies.

Goot | RX-852AS Soldering Station 150W

zivit.drori — Mon, 04 Jun 2018 10:39:34 +0000

Phenomenal heat recovery with 150W compact high-output heater.
Excellent heat recovery has been achieved by combining a 150W compact high-output heater with a high-sensitivity sensor.

Included:

Station Unit, Soldering Iron (RX-85GAS / Tip is not included), Soldering Iron Stands (ST-21) Brass Wool & Sponges included, Inlet Power Cord

Features:

Fastest in Its Class
Reaches 350°C in only 14 seconds. (Only 6 seconds when using RX-80HRT tips.)
Light and Compact Handpiece
Same size as the RX-80GAS.
Tip Replacement without Tools (PAT.)
Slide-change tip. Easy to replace a hot tip without any other tools.
Thick Tip Coating for Lead-free Soldering
All tips have extra-thick iron plating, to resist erosion by lead-free solder.
RX-80HRT Tips also Available
More than 40 tips are available, including the RX-80HRT tips.

The post Goot | RX-852AS Soldering Station 150W appeared first on ASI Technologies.

Goot | RX-802ASPH Nitrogen Soldering 80W

zivit.drori — Mon, 04 Jun 2018 10:35:18 +0000

Free Nitrogen Soldering Station

Station Unit, Soldering Iron (RX-80GASPH / Tip is not included), Soldering Iron Stands (ST-21) Brass Wool & Sponges included, Tip changing tool(RX-80PHC)

All-in-one N2 Nozzle Tips (PAT.)
Each RX-80HRT tip is euipped with a slim N2 nozzle.
Slim N2 Nozzles
φ6.4mm slim N2 nozzles. Get into small spaces easily.
Light and Easy-to-use Handpiece
Handpiece weighs only 33g. So light it’s hard to believe it’s for a Nitrogen station!
Flexible N2 Induction Tube
Super-flexible. Allows free maneuvering of handpiece.
Special Tool for Easy Tip Replacement
Comes with a handy tool to change a hot tip easily.
Improving Lead-free Soldering
Advantages of Preheating with Nitrogen.

The post Goot | RX-802ASPH Nitrogen Soldering 80W appeared first on ASI Technologies.

מלחם GOOT RX-802AS | 80W

zivit.drori — Mon, 04 Jun 2018 10:33:41 +0000

6 שניות להגעה לטמפרטורה הרצויה. מתאים להלחמה נטולת עופרת.

כלול בערכה:

יחידת הלחמה, מלחם (RX-85GAS / קצה אינו כלול), מעמדים למלחם (ST-21), תלתלי ברונזה וספוגים, כבל חשמל.

מאפיינים:

התאוששות מהירה ממצב שינה (פטנט)
טמפרטורה יציבה במהלך פעולה רציפה. מתאים להלחמה נטולת עופרת.
מגיע לטמפרטורה המבוקשת תוך 6 שניות בלבד מרגע ההפעלה.
ראש הלחמה נשלף. קל להחלפה ללא צורך בכלים נוספים (פטנט רשום)
ידית תרמית מבודדת (פטנט) מאפשרת עבודה נוחה ובטוחה.
ראשי ההלחמה מצופים בשכבת ברזל עבה במיוחד, להגנה מפני שחיקה וחמצון של ראש ההלחמה גם בהלחמות על ידי בדיל נטול עופרת.
ראש ההלחמה יוצא על ידי החלקת הידית ומאפשר החלפה קלה.
צרו קשר להצעת מחיר, ייעוץ ופרטים נוספים.

The post מלחם GOOT RX-802AS | 80W appeared first on ASI Technologies.