Materials - ASI Technologies

ASI-3283 – Drop-in Replacement for 3M™ Fluorinert™ FC-3283

keren many — Sun, 08 Jun 2025 11:52:53 +0000

ASI-3283S is a high-performance perfluorinated liquid developed and manufactured by ASI Technologies as a direct, tested, and validated replacement for 3M Fluorinert FC‑3283.
Engineered for single-phase cooling, thermal shock testing, and high-voltage insulation, ASI-3283S provides identical thermal and dielectric properties with improved environmental compliance and availability.

With zero ozone depletion, significantly lower global warming potential, and recyclability via distillation, ASI-3283S offers a future-proof solution for OEMs and integrators transitioning from legacy PFCs.

Key Features & Benefits

Functionally equivalent to FC‑3283 – ready for immediate use
Non-flammable and safe – no flash point
High dielectric strength (>40 kV)
Operational stability from −65°C to +130°C
Recyclable and reusable via closed-loop distillation
Ultra-low surface tension (14.6 mN/m) for effective micro-cooling
Environmentally responsible: ODP = 0, low GWP

Applications

Semiconductor thermal management – test & burn-in systems
Thermal shock & cycling – automotive, aerospace, defense testing
High-voltage insulation – converters, sensors, transformers
Precision cleaning – removal of particulate and ionic contaminants

The post ASI-3283 – Drop-in Replacement for 3M™ Fluorinert™ FC-3283 appeared first on ASI Technologies.

Precision Cleaning Fluid & Novec™ 71IPA Replacement | ASI 71IPA

keren many — Sun, 08 Jun 2025 11:33:19 +0000

ASI 71IPA is a high-performance precision cleaning fluid developed and manufactured by ASI Technologies as a direct, compatible replacement for 3M Novec 71IPA. Based on advanced hydrofluoroether (HFE) chemistry, it delivers equivalent performance in vapor degreasing, rinsing, and precision cleaning—while offering enhanced regulatory compliance and long-term availability.

Designed for manufacturers seeking a safe, residue-free solution with full process compatibility and alignment with international environmental standards.

Key Features & Advantages

Drop-in replacement for Novec 71IPA
Non-flammable, thermally stable formula
Zero ODP, GWP < 310 – meets global regulatory requirements
Low surface tension (14.5 mN/m) – ensures penetration into fine structures
Fast evaporation, no residue
Compatible with metals, plastics, optics, and electronics

Typical Applications

Vapor degreasing of PCBs and electronic assemblies
Flux removal (including “no-clean” residues)
Pre-conformal coating cleaning
Cleaning of lenses, sensors, and precision optics

The post Precision Cleaning Fluid & Novec™ 71IPA Replacement | ASI 71IPA appeared first on ASI Technologies.

ASI 7100 – Fluorinated Fluid Replacement for 3M™ Novec™ 7100

keren many — Sun, 08 Jun 2025 09:45:06 +0000

ASI-7100 is a premium-grade fluorinated solvent developed and manufactured by ASI Technologies as a direct and process-compatible alternative to 3M Novec 7100.
It is built on hydrofluoroether (HFE) chemistry, offering superior wetting, electrical insulation, and thermal control properties, with zero ozone impact and full regulatory compliance.

With an extended operating temperature range (−105°C to +50°C) and extremely low surface tension (14.15 mN/m), ASI-7100 is designed for demanding applications in precision cleaning, display coatings, and semiconductor manufacturing.

Key Features & Advantages:

Direct Novec 7100 alternative – tested for drop-in use
Non-flammable, colorless, low-odor fluid
Excellent electrical insulation: dielectric strength ≥41.9 kV, constant 8.2 @ 1 MHz
Low viscosity (0.487 mm²/s) for efficient flow and sprayability
High thermal stability and chemical resistance
Leaves no residue, safe for sensitive microstructures
Environmentally sound: ODP = 0, GWP = 320

Applications

Precision cleaning of semiconductor components and optics
Heat transfer fluid in wafer testing, burn-in systems, and assemblies
Solvent carrier for anti-fingerprint or display coating systems
Wetting agent in specialty chemical formulations

The post ASI 7100 – Fluorinated Fluid Replacement for 3M™ Novec™ 7100 appeared first on ASI Technologies.

Aculon | Electronics Waterproofing Coating – Nanoprofe

keren many — Mon, 25 Dec 2023 14:09:37 +0000

Aculon® award-winning NanoProof® Series offer customers a range of PCB & electronics waterproofing coating solutions for protecting against accidental water damage to IPX7, immersion in water at one meter depth for 30 minutes, to greater barrier properties that can withstand 100 hours immersion in sweat solutions and some of the most stringent test methods developed for non-hermetic components.

Aculon® NanoProof® electronic grade coating series provides anti-wetting, anti-stiction, chemical protection, corrosion protection, and moisture protection.

The NanoProof® 3 series offers direct replacements for 3M Novec products, providing a readily available and accessible alternative to 3M Novec 1700, 1900, and 2700 product series.

The post Aculon | Electronics Waterproofing Coating – Nanoprofe appeared first on ASI Technologies.

Aculon | NanoClear SMT Stencil Nano Coating

keren many — Wed, 19 Jul 2023 13:30:12 +0000

SMT Stencil Nano-Coatings

Aculon® NanoClear® SMT Stencil Nano-Coating is the world’s premier stencil coating. With an extremely simple, quick, and effective coating process, NanoClear® will improve print quality, increase throughput, reduce defects and enhance printing with small apertures!

World’s #1 Electronic SMT Stencil Nano-Coating

Aculon®, an award-winning & proven supplier to the SMT stencil industry, introduces Aculon® NanoClear®, the best-in-class SMT stencil nano-coating technology that improves print quality, increases efficiency, lowers total costs and enhances printing on all SMT stencils, both simple & complex.

Better Quality Printing
Reduce Underside Cleaning
No Capital Equipment
Durable Treatment
Apply in less than 5 Minutes
Treat Sensitive Apertures
Treats Aperture Walls
Cost Effective
Industry Proven
Increased Print Reliability
Reduced Paste Transfer
Reduce Flux Bleed
Reduce Solder Ball Transfer
Improve First Pass Yield

The post Aculon | NanoClear SMT Stencil Nano Coating appeared first on ASI Technologies.

AIM Solder | NC257MD Jet Printing Solder Paste

ASI Specialist — Mon, 12 Sep 2022 10:14:19 +0000

Features:

– Specially Engineered for Mycronic Jet Printers

– Clear Pin-Probe Testable Residue

– Excellent Wetting, Even Leadless Devices

– Reduces Voiding Under Micro-BGAs

– 8-12 Hour Tack Time

– Vapor Phase Compatible

– For Use With Mycronic AG Type Ejector

NC257MD solder paste has been specifically developed for Mycronic Jet Printers. Its unique rheological properties were engineered and validated through extensive testing in collaboration with Mycronic to provide continuous and consistent deposits. NC257MD prolongs ejector life and reduces paste scrap and consumption. The superior wetting ability of NC257MD results in bright, smooth and shiny solder joints and reduced voiding on BGA and BTC devices. NC257MD produces low post reflow flux residues, which remain crystal clear and easily probed even at the elevated temperatures required for lead-free alloys.

The post AIM Solder | NC257MD Jet Printing Solder Paste appeared first on ASI Technologies.

AIM | V9 NO CLEAN SOLDER PASTE

ASI Specialist — Sun, 10 Jul 2022 13:38:47 +0000

Low Voiding: as low as 1% on BGA and <5% on BTCs
Capable of Consistent Printing with Area Ratio <0.66
High Reliability (SIR)
Drop-in for M8
REACH and RoHS* Compliant
Available in SAC305 T4
DESCRIPTION
V9 No Clean solder paste is formulated for near-zero voiding on
BGA, BTC and LED soldering applications. Significant void
reduction achievable on all surface finishes including ENIG, ImSn
and OSP. V9 exhibits stable print performance on fine feature

devices over 12 hours. V9 post-process residue is easily pin-
probed and has high SIR values.

The post AIM | V9 NO CLEAN SOLDER PASTE appeared first on ASI Technologies.

CX18 NO CLEAN CORED WIRE SOLDER

Keren — Mon, 28 Feb 2022 10:19:36 +0000

DESCRIPTION
CX18 is a no clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes.
Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without
the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

STANDARD AVAILABILITY
CX18 is available in multiple lead-free alloys. Additional alloys and diameters may be available upon request.

APPLICATION
Best results are obtained with a properly sized solder iron tip at a temperature between 300° – 400°C (575° – 750°F) for leaded alloys and 370° – 425°C (700° – 800°F) for lead-free alloys. If additional flux is required AIM NC280 liquid flux or NC217 gel flux are recommended.

CLEANING
CX18 can be cleaned with commercially available flux removers. IPA is not recommended. Contact AIM for specific information.

SAFETY
Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.

The post CX18 NO CLEAN CORED WIRE SOLDER appeared first on ASI Technologies.

RX18 NO CLEAN CORED WIRE SOLDER

Keren — Mon, 28 Feb 2022 09:41:07 +0000

RX18 no clean flux core wire solder was developed to provide excellent soldering results with all alloys and surface finishes.

Engineered for robotic soldering, RX18 promotes thermal transfer, fast wetting and rapid solder penetration into plated through holes or surface mount interconnections.

RX18 specialized packaging ensures consistent, accurate, jam-free wire feeding.

RX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements and do not require cleaning.

The post RX18 NO CLEAN CORED WIRE SOLDER appeared first on ASI Technologies.

AIM | No-Clean Cored Wire, CX18, New!

kramer.niels — Mon, 13 Apr 2020 16:22:29 +0000

CX18 is a no-clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula that promotes thermal transfer, fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

Features:

Fast Wetting
Minimal/Clear Residue
Extends Solder Tip Life
ROL0 per IPC J-STD-004
REACH and RoHS Compliant*
Low Odor / Fumes
Halogen-Free per EN14582

The post AIM | No-Clean Cored Wire, CX18, New! appeared first on ASI Technologies.

AIM | Specialty Alloys

kramer.niels — Mon, 01 Apr 2019 17:55:29 +0000

AIM specialty alloys consist of, but are not limited to, Indium, Bismuth, Cadmium, Gold and Gallium. The term “specialty” is used to describe solders that do not meet the standard tin-lead temperature range. AIM has developed solder products that meet customer needs on either side of 183°C.

The post AIM | Specialty Alloys appeared first on ASI Technologies.

AIM | Precision Solder Preforms

kramer.niels — Mon, 01 Apr 2019 17:40:09 +0000

AIM’S SOLDER PREFORMS provide a precise volume of solder for each solder joint that is uniform over high volumes. This provides high volume solder assembly operations with increased yield via precise delivery & control of solder to each interconnect.

AVAILABLE ALLOYS AIM manufactures solder preforms in a wide range of alloys/melt points ranging from 60°C to 356°C. These alloys include gold-tin/gold-germanium, pure indium and indium alloys, RoHS compliant lead-free alloys, and standard tin-lead compositions.

DIMENSIONS / SHAPES AIM manufactures preforms in any size or shape including rectangles, washers, discs, and frames. We also stamp complex parts to customer specifications; length/width/diameter: 0.010” and greater, thickness: 0.001” and greater.

FLUXES AIM manufactures fluxes and cleaners for use with solder preforms. Available flux chemistries include RA, RMA, No Clean and Water Soluble. Fluxes can be supplied in liquid or paste form and can be pre-coated onto the solder preforms.

The post AIM | Precision Solder Preforms appeared first on ASI Technologies.

ASI | 8611 Red Glue SMT Dispensing

kramer.niels — Fri, 15 Feb 2019 11:03:05 +0000

8611 is a single component heat curing epoxy adhesive. For machine dispensing. The product has excellent heat resistance, excellent moisture resistance and adhesion strength, electrical properties, good storage stability. 。

Typical application:
Mainly used for STM bonding components.

SMT dispensing red glue 8611	30ml/tube	P/N 27202
SMT dispensing red glue 8611	10ml/tube	P/N 27204

The post ASI | 8611 Red Glue SMT Dispensing appeared first on ASI Technologies.

ASI | 8621 Red Epoxy SMT Printing

kramer.niels — Fri, 15 Feb 2019 10:21:48 +0000

8621 is a one component heat curing epoxy adhesive. Suitable for screen printing. This product has excellent heat resistance, excellent moisture resistance and adhesion strength, electrical properties, has good storage stability.

Typical application:
Mainly used for STM bonding components.

SMT Printing red Epoxy 8621 – 200g/tub – P/N 27201

The post ASI | 8621 Red Epoxy SMT Printing appeared first on ASI Technologies.

ASI | Desoldering Wick

kramer.niels — Fri, 15 Feb 2019 09:21:42 +0000

Desoldering wick cpn	1.5mm*3.0M	P/N 54499
Desoldering wick cpn	2mm*3.0M	P/N 54500
Desoldering wick cpn	3mm*3.0M	P/N 54501

The post ASI | Desoldering Wick appeared first on ASI Technologies.

AIM | Surface Mount Epoxy 4044

kramer.niels — Sat, 05 Jan 2019 10:25:02 +0000

Epoxy 4044 is a single component, epoxy adhesive used for bonding SMT components to a PWB for double sided reflow or wave solder assembly. Epoxy 4044 has a formulated tolerance to shear-thinning, a dot formation suitable for automated dispense equipment or positive displacement pump systems, and quick cure properties when exposed to heat. Viscosity and surface tension of Epoxy 4044 are adequate for use with high speed placement equipment.

The post AIM | Surface Mount Epoxy 4044 appeared first on ASI Technologies.

AIM | SAC305 SMT Reels

kramer.niels — Fri, 28 Sep 2018 07:40:07 +0000

The post AIM | SAC305 SMT Reels appeared first on ASI Technologies.

AIM | RMA Cored Wire

zivit.drori — Wed, 30 May 2018 15:24:03 +0000

RMA is a mildly activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints. RMA wire will leave slight to moderate post-process residues that may be left on noncritical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning. IPC flux classification for this material is ROL0.

Features:

Good Activity Level
Mildly Activiated Flux
Good Wetting Properties
Good Thermal Transfer
Glycol-Free
Available in Industry Standard Sizes

The post AIM | RMA Cored Wire appeared first on ASI Technologies.

AIM | NC273 LT Solder Paste

zivit.drori — Wed, 30 May 2018 15:20:08 +0000

The revolutionary activator system in AIM’s new NC273LT low temperature solder paste improves the wetting performance of bismuth alloys to RoHS compliant plating and surface finishes, while ensuring long stencil life, excellent transfer efficiencies and minimizes solder balling common to high bismuth materials. The majority of lead-free solutions require higher processing temperatures than their lead bearing predecessors. In some cases, these higher temperatures cannot be tolerated by other materials in the assembly. When thermal exposure during the assembly process is a limitation, NC273LT solder paste for bismuth bearing alloys is an excellent RoHS compliant replacement. Bismuth bearing solder pastes can reduce peak reflow temperature requirements to as low as 170°C – 175°C (340°F – 350°F). AIM’s NC273LT solder paste formula with bismuth containing alloys can provide an assembler with an innovative solution when temperature sensitivity is paramount.

The post AIM | NC273 LT Solder Paste appeared first on ASI Technologies.

AIM | M8 Solder Paste

zivit.drori — Wed, 30 May 2018 15:18:54 +0000

M8 no clean solder paste is designed for the most demanding high density electronic assemblies. An evolution of the highly successful NC258 platform, M8 brings no clean solder paste to the next level. Developed in combination with T4 and finer mesh leaded and lead-free alloy powders, M8 provides stable transfer efficiencies required for today’s challenging applications. A novel activator system provides powerful, durable wetting action accommodating a wide range of profiling processes and techniques. M8 eliminates HiP defects on BGA and reduced voiding on QFN/BTC components while producing bright shiny solder joints. M8 leaves minimal, high purity, residue, engineered to be safely left in place. Developed with the input of coating and cleaning industry partners, residues can be directly coated or easily removed.

Features:

Halogen-free
Low voiding on BGA and BTC components
REACH and RoHS compliant
For use with demanding, high density electronic assemblies
High SIR/Electrically safe residue
Formulated for use with T4 and finer powders
Mitigates head-in-pillow

The post AIM | M8 Solder Paste appeared first on ASI Technologies.

AIM | J8 No Clean Jetting Solder Paste

zivit.drori — Wed, 30 May 2018 15:17:24 +0000

AIM’s J8 No Clean Jetting Solder Paste is specially formulated for use with jetting equipment providing consistent solder deposits as small as 200μm. J8 is fully compatible with all AIM no clean solder pastes for use in applications where combining jetted paste deposits with printed paste deposits is required. J8 has a novel activator system providing powerful, durable wetting action accommodating a wide range of profiling producing bright shiny joints without graping defects. J8 has reduced voiding to as low as <5% on BGA and <10% on BTC ground pads.

The post AIM | J8 No Clean Jetting Solder Paste appeared first on ASI Technologies.

AIM | SN100 lead-free solder alloy

zivit.drori — Wed, 30 May 2018 15:12:35 +0000

Best choice for lead-free wave soldering

SN100 is a lead-free solder alloy is comprised of tin-copper-nickel + germanium. SN100 offers user-friendly properties and has been proven in commercial production since 1999. The result of these advantages is that SN100 offers high-throughput and the lowest cost of ownership as compared to any other lead-free solder alloy.

The Bottom Line

Customer experience over several years is that the TOTAL cost of running a standard wave soldering machine with SN100 when all factors are taken into account can be up to one third the cost of running the same machine with tin-silver-copper alloys. The actual saving in each case will depend on the number of factors that apply, but the cost of running a line with SN100 is always lower than the cost of running the same line with tin-silver-copper.

Successfully tried and tested

Leading electronics manufacturers throughout the world have used SN100 with outstanding results. To date, millions of circuit boards have been assembled with the SN100 family of solders in all types of products. Many of the devices soldered with SN100 already have been in use for several years.

Seamless Changeover

AIM has already helped multitudes of manufacturers implement lead-free soldering, and we invite you to benefit from our expertise. Our services include process audits, solder pot analyses, and on-going applications support. The issue of lead-free soldering can be complex. We are here to help you from changeover right through to optimization.

The post AIM | SN100 lead-free solder alloy appeared first on ASI Technologies.

AIM | Sn63 Pb37 Electropure™ High Purity Alloy

zivit.drori — Wed, 30 May 2018 15:11:19 +0000

Sn63/Pb37 Electropure is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solder, thus reducing drossing, improving flow, and reducing bridging during soldering. Sn63/Pb37 is a eutectic alloy with a melting point of 183°C. Typical applications are wave soldering and plating where Sn63/Pb37 is primarily used as a coating for corrosion protection, and as a base for soldering. This alloy is available in bar, solid and cored wire, foil, spheres, preforms, powder, solder paste, ingot, and anode form.

Features:

High Purity
Reduces Drossing
Exceeds IPC-J-STD-006 Specifications

The post AIM | Sn63 Pb37 Electropure™ High Purity Alloy appeared first on ASI Technologies.

AIM | SAC305 Lead-free Alloy

zivit.drori — Wed, 30 May 2018 15:09:39 +0000

SAC305 is a lead-free alloy that contains 96.5% tin, 3% silver, and 0.5% copper. This alloy falls under the JEIDA recommendation for lead-free soldering. When used in wave soldering, AIM’s SAC305 bar solder offers far superior fluidity as compared to other alloys and makes of bar, resulting in excellent flow. AIM’s SAC305 bar solder also produces less dross than other bar solder, wets well, provides superior joint strength, and offers superior copper dissolution rates. AIM’s SAC305 bar solder is alloyed in the proprietary Electropure method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solder, thus reducing drossing, improving flow and reducing bridging during soldering. SAC305 may be used with most existing equipment, processes, coatings, and flux chemistries.

Features:

Lowest Cost Sn/Ag/Cu Alloy
Excellent Fatigue Resistance
Compatible with all Flux Types
Excellent Solder Joint Reliability
Best Wetting Sn/Ag/Cu Alloy

The post AIM | SAC305 Lead-free Alloy appeared first on ASI Technologies.

AIM | High Melting Point Solder Alloys

zivit.drori — Wed, 30 May 2018 15:08:02 +0000

High melting point solder alloys

Down hole electronics, such as oil and gas exploration, require solder alloys that have the durability to withstand the extreme thermal, geological and mechanical stresses of these applications. AIM understands system reliability is of the utmost importance, and offers a selection of high melting point solder alloys in a variety of forms which are proven to fulfill the requirements necessary for long-term reliability in solder joints.

The post AIM | High Melting Point Solder Alloys appeared first on ASI Technologies.

AIM | Additional Alloys

zivit.drori — Wed, 30 May 2018 15:05:34 +0000

AIM offers a broad range of alloys for SMT, wave soldering, hand soldering, and various applications. Commonly used alloys for the electronics industry are shown below. Other alloys are available upon request.

The post AIM | Additional Alloys appeared first on ASI Technologies.

AIM | No Clean Flux Pen

zivit.drori — Wed, 30 May 2018 15:00:41 +0000

AIM’s NC Flux Pen contains a low- to medium-solids, no-clean liquid flux formulated to aid soldering with flux cored wire solder. NC Flux offers an excellent activity level for use on ENIG, imsn, imag, bare copper, solder coated and OSP pcbs, leaving negligible post-process residues that are non-conductive and do not require post-process cleaning. NC Flux is safe to be left on the circuit board and passes IPC-004A and -004B SIR testing without thermal exposure.

The post AIM | No Clean Flux Pen appeared first on ASI Technologies.

AIM | RMA 202-25 Medium Solids, Mildly Activated Liquid Flux

zivit.drori — Wed, 30 May 2018 14:57:37 +0000

RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning. As a mildly activated rosin based flux, RMA 202-25 offers a wide process window, good cleaning properties, and excellent thermal transfer.

The post AIM | RMA 202-25 Medium Solids, Mildly Activated Liquid Flux appeared first on ASI Technologies.

AIM | NC280 Low-to-medium solids, no-clean Liquid Flux

zivit.drori — Wed, 30 May 2018 14:52:32 +0000

NC280 is a low-to-medium solids, no-clean liquid flux formulated to leave minimal post-process residues that are pin testable without cleaning. NC280 offers an excellent activity level with good performance on bare copper, solder coated and organic coated PWBs, leaving negligible post-process residues that are non-conductive and do not require post-process cleaning. NC280 is safe to be left on the circuit board and passes SIR in the raw state. NC280 is extremely safe for rework, palletized wave soldering and point-to-point selective soldering. NC280 has a unique chemistry and a wide process window, making it a drop-in for most no-clean and RMA wave soldering operations, including lead-free wave soldering.

The post AIM | NC280 Low-to-medium solids, no-clean Liquid Flux appeared first on ASI Technologies.

AIM | NC217 Gel Flux

zivit.drori — Wed, 30 May 2018 14:51:04 +0000

NC217 Gel Flux is designed for touch-up and repair work where the flux may spread away from the heat source. NC217 Gel Flux is electrically safe even without a thermal profile. This gel flux dries within one hour of use with or without heat and is tack-free after four hours.

The post AIM | NC217 Gel Flux appeared first on ASI Technologies.