Two high-speed placement heads, each with 20 suction cups, ensure unprecedented productivity over a line length of less than one meter.

The post RX-8 Highspeed Pick & Place Machine | JUKI appeared first on ASI Technologies.

The post RS-1XL Placement Machine – smart, fast, modular | JUKI appeared first on ASI Technologies.

High-speed chip shooter and sophisticated mounter in one. One machine, one placement head, endless possibilities – always a bull’s eye!

The post RS-1R Pick & Place Machine – smart, fast and modular | JUKI appeared first on ASI Technologies.

The post LX-8 Flexible Highspeed Placement Machine | JUKI appeared first on ASI Technologies.

P/N 62381

The post NEODEN | PM3040 Stencil printer appeared first on ASI Technologies.

The post Neoden | T-8 Reflow Oven appeared first on ASI Technologies.

The post Neoden | T-5S Reflow Oven appeared first on ASI Technologies.

P/N 62382

The post Neoden | T5 Reflow Oven appeared first on ASI Technologies.

Features

• Laser positioner, easy for online programming
• Vacuum detection, automatically dispose and make up if picking fail or pickmisaligned
• Dual pick and place head design helps increase output, 360-degree orientation
• Noise reduction, Dual built-in mute type pumps (cost and room saving, no need to prepare additional pump)
• Standard 8G SD card, mass storage of CSV working file
• LCD, Touch screen interface input/output, easy operation (Chinese/English)
• Integrated Automatic Feeders (cost saving, no need to buy extra mobile feeders), Automatic Nylon Spool Wheel (Very convenient, tape Nylon skin automatically peel away)
• Works with four different types of high-precision nozzles
• Humanization design, customized feeders
• Can mount 0402, 0603, 0805, 1206, 1812, 2010, 2512, SOT-23, LED (3528, 5050 etc.), SOT89, SOP-8, SOP-14, SOP-16, SOT-223, SOT-252 and IC components (IC size under 16*16mm, PIN foot less than 100, fine-pitch above 0.5mm, the height of component less than 3mm) with required precision.
• No vision system, the self-developed Laser positioning principle is quite effective for this type of machine.
• Build-in software operating system, support Online programming: could easily online programming if you don’t have PCB Circuit diagram, with the assistance from laser positioner. No need to attach to a separate computer.
• Easy programming, only takes 5mins: use Protel tool to extract the PCB circuit coordinate file, and use the format transformation tool we provided to you to transform the file format, and then copy to the SD card, insert to the machine, then you could use the file directly.
• Standardization of packaging ensures safe transport.
• Small and lightweight: simple installation, convenient transportation.
• Working power 100W: Environmental protection and energy saving.

The post NEODEN | TM220A Desktop Pick and Place Machine appeared first on ASI Technologies.

NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen, but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.

Features:

• Vision system

An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA

• Four precision heads

4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree of coupling way, to ensure it can mount components with higher space, more gentle and more accurate

• Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

• General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

• Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

• Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | without auto rails appeared first on ASI Technologies.

NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen, but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.

https://www.youtube.com/watch?v=4P7DDSTXIQo

Features

• Vision system
  An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA
• Four precision heads

4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree of coupling way, to ensure it can mount components with higher space, gentler and more accurate

• Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

• Auto Rails Achieve Continuous Placement

1.5m auto rails could be connected with universal conveyors to achieve continuous placement

• General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

• Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

• Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | with rails appeared first on ASI Technologies.

P/N 62380

The post Neoden 4 | Pick and Place appeared first on ASI Technologies.

Maximum Productivity

JUKI’s RX-7 achieves a mounting speed of up to 75,000 CPH (optimum) thanks to its intelligent design with two ultra-fast parallel rotational heads that can each hold up to 16 vacuum nozzles.

High Quality

The two built-in cameras – one per rotational head – create real-time images during the placement process: in the course of the feeder uptake as well as while the component is being placed. The RX-7 cameras regonise whether components are positioned and soldered correctly, thus preventing mounting errors and defective circuit boards in advance.

User Friendliness

Owing to the integrated touchscreen, JUKI’s RX-7 is equipped with an easy to operate user surface, which allows an intuitive machine operation. As a result even users without any extensive technical knowledge can easily created pick-and-place programs.

The post JUKI | RX-7 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s RX-6 specialises in high-speed component placement of up to 52,000 CPH (optimum). Each machine comes with two placement heads, one at the front and one at the back. This increases versatility as well as productivity and ensures the effective placement of components.

High Quality

Equipped with a laser system as well as an optical system the RX-6 operates with 2 centring technologies which ensure an uninterrupted optical detection of components at high speed. The standard RX-6 feature of a placement monitor and other features such as EPV – Embedded Process Verification, CVS – Component Verification System or OPASS – Offset Placement After Solder Screen-printing – recognise possible sources of error, even electrical ones, quickly and reliably.

High Flexibility

JUKI’s RX-6 is the ideal machine for line solutions, processing components from 0402 (01005) up to 50 × 50 mm. The head with three nozzles supports an even larger section: from 0402 (01005) chips with plugs up to lengths of 100 × 100 mm or 50 × 180 mm. The maximum component height that can be processed is 33 mm. Printed circuit boards of sizes up to 905 × 590 mm can be processed as standard.

The post JUKI | RX-6 Pick and Place appeared first on ASI Technologies.

The consistent further development of the tried-and-tested technologies from the RS-1 opens up new, outstanding possibilities:

Even faster assembly of smallest chips (0201 metric) up to large components of 50 x 150 mm or 74 mm edge length for square components. The base frame of the RS-1R has been completely redesigned for this purpose. The unique Takumi head covers even more different component heights and thus achieves a decisive speed advantage. The 360 ° visual component recognition allows the secure detection of user-specific polarity marks. Thanks to the RFID integration in the nozzles, these can be traced back completely together with the components and boards. The machine combines the features of a chip shooter with a mounter for large components. The purchase of each special machine type for it eliminates as well as a change of the placement head.

The RS-1 family has the unique TAKUMI (Japanese for “master”) head. This lowers for small components down to a distance of 1 mm down to the PCB. This minimizes the travel distance of the individual placement axes (8 units) and enables the decisive speed advantage in placing the smallest components which are usually represented in the largest number on the PCB.

Highest flexibility
The RS-1 supports a large component spectrum with components from 0201 (metric) to 74 mm (square) or 50 x 150 mm (rectangular). The standard component height of up to 25 mm completes the high flexibility.

Changing the placement head is not necessary!

Meets highest standards
Vision Teaching supports the visual learning of new components on the machine within a few minutes. You decide which component properties are important.

There is even more space in the magazine for a wide variety of nozzles, and nozzles can be optionally accommodated up to a size of 7x28mm.

For even more comfort and ease of use, the feeder trolleys have been redesigned and an on-screen keyboard has been integrated.

The post JUKI | RS-1R Pick and Place appeared first on ASI Technologies.

High Productivity

The high-resolution camera enables high-precision inspection of components such as QFPs with 0.2 mm lead pitch.

High Quality

A non-contact laser sensor measures the height of the PCB to prevent exessive force on components and reduce the risk of damage. This height measurement function sensor can also measure the pick height more accurately and faster than other methods.

The post JUKI | KE-3000 Pick and Place appeared first on ASI Technologies.

Long Board Production up to 1,500 mm

This model is capable of 1,200 mm long PWB production as standard. Long board production up to 1,500 mm is available. This is the best long board size on the market. Long board production includes several clamping steps. Placements on the placement area are optimized in order to enhance placement speed and productivity significantly.

High Flexibility

Alternate pick by offset nozzles achieves high-speed placement for large components up to 25 mm diameter. Offset nozzles enable pick, recognition and placement of 6 diffusion lenses or large components, up to 25 mm diameter, in one pass. Reduced head unit movement improves productivity significantly.

High Productivity

The placement rate of 32,000 CPH is achieved due to a lighter crossbar and a revised steering of the head, therefore attaining a tempo increase of 18 % as opposed to the latest model. An independent control of each individual Z- and Theta-Axis of the head allows superior flexibility, accuracy and redundancy while achieving high-precision placement angles.

P/N 62368

The post JUKI | JX-350 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s FX-3 achieves a mounting performance of up to 90,000 CPH (optimum) thanks to four independent cross-rails, each with a six-nozzle placement head set on two mounting stations, providing the machine with 24 vacuum nozzles in total.

Compatible Feeders

The FX-3 supports mechanical and electronic feeders that can be used optionally with feeder trolleys if required. This provides companies with the flexibility to keep using their existing equipment for the long term.

User Friendliness

JUKI’s FX-3 includes a user-friendly operator interface with a 15-inch LCD touchscreen both at the front and the back of the machine for easy, intuitive use. This allows users to create pick-and-place programs even without extensive technical knowledge.

P/N 62352

The post JUKI | FX-3 Pick and Place appeared first on ASI Technologies.