Desoldering - ASI Technologies

Piergiacomi | Desoldering pump – PD 03

Keren — Thu, 07 Oct 2021 12:08:32 +0000

Desoldering pump; same as PD UNIVERSAL but shorter; (length 201 mm)

The post Piergiacomi | Desoldering pump – PD 03 appeared first on ASI Technologies.

Piergiacomi | ESD-Safe Desoldering Pump – PD Universal D

Keren — Thu, 07 Oct 2021 11:53:37 +0000

ESD – safe desoldering pump; (length 215mm)

The post Piergiacomi | ESD-Safe Desoldering Pump – PD Universal D appeared first on ASI Technologies.

Piergiacomi | Desoldering Pump – PD Universal

Keren — Thu, 07 Oct 2021 10:07:57 +0000

Desoldering pump; (length 215mm)

The post Piergiacomi | Desoldering Pump – PD Universal appeared first on ASI Technologies.

ASI | Desoldering Gun TP100AS

kramer.niels — Thu, 16 Jan 2020 13:11:38 +0000

P/N 54433

The post ASI | Desoldering Gun TP100AS appeared first on ASI Technologies.

Thermaltronics | DS-KIT3 Desoldering Kit for use on the TMT-2000S

kramer.niels — Sat, 05 Jan 2019 13:12:59 +0000

Thermaltronics DS-KIT-3 desoldering kit for use on the TMT-2000S uses shop air to create a powerful air vacuum to clean through-holes quickly and efficiently. Cleaning and maintenance is quick and easy with the use of replaceable filter wools (DS-FW-1) and chamber liners (DS-CL-1).
Uses Thermaltronics DT Series Desoldering Tips. High thermal recovery & performance. Easy and simple maintenance.

P/N DS-KIT-3

The post Thermaltronics | DS-KIT3 Desoldering Kit for use on the TMT-2000S appeared first on ASI Technologies.

Martin | Smart Desolder 01

kramer.niels — Fri, 28 Sep 2018 13:19:38 +0000

As a stand-alone device, it virtually fits on any work bench and can be operated very flexible with two handheld pens.

The SMART DESOLDER combines a manual hot gas source with a vacuum pen for extraction of residual solder. Damage to the pads from overheating or mechanical stress is avoided through targeted heating of the residual solder after lifting the component. The temperature-controlled airflow prevents the neighboring components from warming up. After melting, the residual solder is removed contactless by the vacuum pen. The use of a Teflon tip in the vacuum pen offers outstanding features: the nonstick effect, the temperature-resistance and the mechanically soft surface of the material. As a stand-alone device, it virtually fits on any work bench and can be operated very flexible with two handheld pens.

The post Martin | Smart Desolder 01 appeared first on ASI Technologies.

Thermaltronics | DS-KIT1 Desoldering Kit for use on the TMT-9000S

zivit.drori — Mon, 04 Jun 2018 10:07:59 +0000

Thermaltronics DS-KIT-1 desoldering kit for use on the TMT-9000S uses shop air to create a powerful air vacuum to clean through-holes quickly and efficiently. Cleaning and maintenance is quick and easy with the use of replaceable filter wools (DS-FW-1) and chamber liners (DS-CL-1).

Uses Thermaltronics MDT Series Desoldering Tips.
High thermal recovery & performance.
Easy and simple maintenance.

P/N DS-KIT-1

The post Thermaltronics | DS-KIT1 Desoldering Kit for use on the TMT-9000S appeared first on ASI Technologies.

Goot | TP 280 Automatic Desoldering Station

zivit.drori — Mon, 04 Jun 2018 10:06:07 +0000

New open-valve mechanism achieves unrivaled vacuum power and start-up speed.

Two-stage trigger switch (PAT.P)

Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity
With open-valve mechanism
Ceramic Heater with Internal Sensor
A wide range for terminals, connectors and flat ICs
Superior Temperature-Control Circuit
To keep the temperature constant during desoldering
Zero Volt Switch Circuit
Reduces noise during heater ON/OFF
Replaceable Cartridge Filter
Makes changing the filter easy
Vacuum pressure compared with other GOOT models
The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (About 4 times faster than our TP-200AS).

The post Goot | TP 280 Automatic Desoldering Station appeared first on ASI Technologies.