GOOT Soldering Systems - ASI Technologies

BATTERY CORDLESS SOLDERING IRON – MSD-40 | ASI

ASI Specialist — Thu, 22 Sep 2022 14:23:54 +0000

LED light allows comfortable soldering in dark or compact places, e.g. car wiring, remote
locations, etc.
Attachment type tip can be replaced without tools. Low-battery lamp prevents sudden
interruption of work from battery exhaustion.
Protective cap prevents accidental switch-ons. Carry in bag or pocket safety. Hole to
attach strap

The post BATTERY CORDLESS SOLDERING IRON – MSD-40 | ASI appeared first on ASI Technologies.

ASI | GAS SOLDERING IRON –GP510

ASI Specialist — Thu, 22 Sep 2022 13:43:43 +0000

Heats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power
of 15-75W with the temperature adjuster.
Optional tip converts it to a hot knife or other hot air tools.
Operates approx. 45 minutes between refills (when used at max. temperature as a soldering
iron).
One-handed, one-touch ignition switch

The post ASI | GAS SOLDERING IRON –GP510 appeared first on ASI Technologies.

GOOT | SVS-800AS All in One Service Station

kramer.niels — Wed, 31 Jul 2019 11:53:27 +0000

Omnifunctional machine for soldering, desoldering and reworking.

REWORK UNIT

The temperature can be set to max 550°C.

SOLDERING UNIT

Good for a wide range of soldering work with 70W heater.

DESOLDERING UNIT

Instant desoldering with open-valve mechanism.(Please refer to the next page.)

INDIVIDUAL POWER SWITCHES

Along with the main power switch, there are switches for soldering, desoldering, and reworking.

The post GOOT | SVS-800AS All in One Service Station appeared first on ASI Technologies.

Goot | St-40 tip cleaner

kramer.niels — Sat, 05 Jan 2019 12:21:52 +0000

Goot ST-40 is a soldering iron tip cleaner made of brass shavings.
The container comes with two packs of shavings.

Features

Made of low-abrasive brass shavings.
Cleans the tip better than conventional sponges
No water is required to use the tip cleaner.
The container is made of heat-resistant and slip-proof silicon rubber.
Reduces the temperature loss that occurs when using a wet sponge.
Long lifetime.
One spare pack of brass shavings is included.

P/N 54441

The post Goot | St-40 tip cleaner appeared first on ASI Technologies.

Goot | RX-852AS Soldering Station 150W

zivit.drori — Mon, 04 Jun 2018 10:39:34 +0000

Phenomenal heat recovery with 150W compact high-output heater.
Excellent heat recovery has been achieved by combining a 150W compact high-output heater with a high-sensitivity sensor.

Included:

Station Unit, Soldering Iron (RX-85GAS / Tip is not included), Soldering Iron Stands (ST-21) Brass Wool & Sponges included, Inlet Power Cord

Features:

Fastest in Its Class
Reaches 350°C in only 14 seconds. (Only 6 seconds when using RX-80HRT tips.)
Light and Compact Handpiece
Same size as the RX-80GAS.
Tip Replacement without Tools (PAT.)
Slide-change tip. Easy to replace a hot tip without any other tools.
Thick Tip Coating for Lead-free Soldering
All tips have extra-thick iron plating, to resist erosion by lead-free solder.
RX-80HRT Tips also Available
More than 40 tips are available, including the RX-80HRT tips.

The post Goot | RX-852AS Soldering Station 150W appeared first on ASI Technologies.

Goot | RX-802ASPH Nitrogen Soldering 80W

zivit.drori — Mon, 04 Jun 2018 10:35:18 +0000

Free Nitrogen Soldering Station

Station Unit, Soldering Iron (RX-80GASPH / Tip is not included), Soldering Iron Stands (ST-21) Brass Wool & Sponges included, Tip changing tool(RX-80PHC)

All-in-one N2 Nozzle Tips (PAT.)
Each RX-80HRT tip is euipped with a slim N2 nozzle.
Slim N2 Nozzles
φ6.4mm slim N2 nozzles. Get into small spaces easily.
Light and Easy-to-use Handpiece
Handpiece weighs only 33g. So light it’s hard to believe it’s for a Nitrogen station!
Flexible N2 Induction Tube
Super-flexible. Allows free maneuvering of handpiece.
Special Tool for Easy Tip Replacement
Comes with a handy tool to change a hot tip easily.
Improving Lead-free Soldering
Advantages of Preheating with Nitrogen.

The post Goot | RX-802ASPH Nitrogen Soldering 80W appeared first on ASI Technologies.

מלחם GOOT RX-802AS | 80W

zivit.drori — Mon, 04 Jun 2018 10:33:41 +0000

6 שניות להגעה לטמפרטורה הרצויה. מתאים להלחמה נטולת עופרת.

כלול בערכה:

יחידת הלחמה, מלחם (RX-85GAS / קצה אינו כלול), מעמדים למלחם (ST-21), תלתלי ברונזה וספוגים, כבל חשמל.

מאפיינים:

התאוששות מהירה ממצב שינה (פטנט)
טמפרטורה יציבה במהלך פעולה רציפה. מתאים להלחמה נטולת עופרת.
מגיע לטמפרטורה המבוקשת תוך 6 שניות בלבד מרגע ההפעלה.
ראש הלחמה נשלף. קל להחלפה ללא צורך בכלים נוספים (פטנט רשום)
ידית תרמית מבודדת (פטנט) מאפשרת עבודה נוחה ובטוחה.
ראשי ההלחמה מצופים בשכבת ברזל עבה במיוחד, להגנה מפני שחיקה וחמצון של ראש ההלחמה גם בהלחמות על ידי בדיל נטול עופרת.
ראש ההלחמה יוצא על ידי החלקת הידית ומאפשר החלפה קלה.
צרו קשר להצעת מחיר, ייעוץ ופרטים נוספים.

The post מלחם GOOT RX-802AS | 80W appeared first on ASI Technologies.

Goot | TP 280 Automatic Desoldering Station

zivit.drori — Mon, 04 Jun 2018 10:06:07 +0000

New open-valve mechanism achieves unrivaled vacuum power and start-up speed.

Two-stage trigger switch (PAT.P)

Step 1
Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2
Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity
With open-valve mechanism
Ceramic Heater with Internal Sensor
A wide range for terminals, connectors and flat ICs
Superior Temperature-Control Circuit
To keep the temperature constant during desoldering
Zero Volt Switch Circuit
Reduces noise during heater ON/OFF
Replaceable Cartridge Filter
Makes changing the filter easy
Vacuum pressure compared with other GOOT models
The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (About 4 times faster than our TP-200AS).

The post Goot | TP 280 Automatic Desoldering Station appeared first on ASI Technologies.