Features:

• No masking of assembly parts required
• Complete dipping into the HFE solvent provide for a 100% surface moistened.
• Few minutes of drying time only
• Generates an approx. 50nm thin protective layer
• HFE liquid condenses and remains in the system
• The assembly leaves the system completely coated and dried.
• The assembly can be normally touched and is process-ready.

For different assemblies different baskets or insertions are usable. Also suitable for universal holders.

• The system BASIC V3 ist easy to operate.
• The system BASIC V3 is always and instantly ready to use and does not require a boot or shutdown.
• No special assembly programs required
• Easy immersion into the HFE solvent ensures a very easy process.
• Different types of assemblies can be packed closely and will be coated simultaneously.
• The used HFE liquid evaporates very quickly.
• The condensing HFE liquid will be absorbed and separated from water.

The water trap separates the water from the HFE liquid in the condensate and empties the water automatically in a 1l bottle. The HFE liquid flows back into the tank.

The collected water can be led in the sewage.

The water trap separates the water from the HFE liquid in the condensate and empties the water automatically in a 1l bottle. The HFE liquid flows back into the tank.

The collected water can be led in the sewage.

The electronic control including all electro-technical components is placed in a panel directly in the BASIC V3 system.

The lift is designed for a basket size with the internal dimensions L300mm x W250mm x H220mm. Other racks or magazines can also be used instead of the basket. The model BASIC V3 is connected easily with a 230V supply.

As an option, the BASIC V3 can be equipped with a filter system.

Another option includes an automated measuring and dosing station to keep the HFE solvent level constant

The post Puretecs | Basic V3 Coating System appeared first on ASI Technologies.

Great emphasis was placed on the process reliability and easy use. The assemblies’ coating is done by immersion in the fluoropolymer HFE solvent contained in the system’s tank. The assemblies to be coated are put in baskets placed on a lift. Both coating systems PRIMA V8 and OPTIMA V6 differ in the basket size.

By closing the lid and pressing the start button the immersion or dipping process and the subsequent drying process are automatically carried out within approximately 6 minutes.

Once the notification of completion appeared the basket can be simply exchanged. The baskets can be adapted easily to the assembly’s geometry or can be substituted with customized racks.

All coating systems are equipped with a cold trap for the HFE liquid recovery where the condensed HFE liquid can be collected in a built-in container or be returned in the tank. This provides for an extremely economic and environmentally friendly operation. A water trap absorbs the produced condensation in another collective container. Thus, the systems are compliant with legal HFE liquids regulations.

The color screen shows all information and is easy to adjust. The systems are equipped with filters for cleaning the HFE liquid. The liquid level is controlled. The lift can be set in any position automatically to allow exact partial immersion. The control interfaces provide for data output.

These coating system models offer a suitable solution for nearly all challenges.

The post Puretecs | OPtima V6 Coating System appeared first on ASI Technologies.