• +972-8-9208844
  • Netser-Sereni 70395, Israel

Aurotek | Router y-S330 loading / unloading In-line Machine

Product description

A fully loading / unloading automatic processing in-line machine. Friendly Touch Panel with 10X CCD Camera to minimize the time of programming. Auto fiducial mark point check and cutting route auto compensation to insure the cutting accuracy.  Automatic router bit check to prevent the bit break incomplete cutting. Loading / unloading the width of the conveyer can be adjusted to fit the different size of works. The pick-and-place device improves the efficiency of the loading and unloading process. Touch Panel Monitor Graphical User Interface (GUI) is adopted, and enables the user to operate by the touch panel easily. Friendly GUI Windows system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.

Additional information



Fixture Table 1 Station
Fixture Working Area X: 630 mm, Y: 550 mm, Z: 60 mm
Cutting Area (Max.) X: 630 mm, Y: 550 mm (Min.) X: 150 mm, Y: 150 mm
PCB Height (Max.) Upside: 15 mm
Downside: Universal Jig – 35 mm, Specific Jig – 45 mm
PCB Thickness 0.5 ~ 2.0 mm (Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter 1.0, 1.2, 1.6, 2.0 mm
Cutting Accuracy ± 0.1 mm
Positioning ± 0.01mm
Axis 6 Axis (X, Y, Z, Carry, P/P, Conveyor).
Moving Speed (Max.) X, Y : 1000 mm/sec, Z: 750 mm/sec
Cutting Speed (Max.) X, Y, Z: 100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Options: 4025DC-T: 470W ((Max.: 30,000 rpm) ; 4033: 500W (Max.: 100,000 rpm)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Set up the paths guided by CCD camera manually.
Safety Area Sensor N/A
Broken Router Bit Detection Standard
Method to back up the program USB
Program Storage HDD
Operating System Windows 7
Man-Machine Interface Touch Screen Monitor, Keyboard, Mouse
Conveyor Width Adjustment (Max.) Y: 550mm (Min.) Y: 100mm
Conveyor Load Capacity 3 KGS
PCB Loading / Unloading Automatic
Power Supply 3 Phase AC220V±3% 50Hz/60Hz, 2.5 kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 2599 x 1678 x 1693 mm *Signal Light – 576mm
Net Weight for the machine Approx. 880 KGS
Height for Working Area (Max.) 930 mm
Vacuum Cleaner YSF-V605 5HP 3.7kW
Questions about this product? Contact Us

We would be happy to assist you with any question or issue.
Or just call us: +972 -8- 3760650

צוות המומחים שלנו ישמח לעמוד לשירותכם
לייעוץ ומידע נוסף השאירו פרטים: