Solder Wire - ASI Technologies

CX18 NO CLEAN CORED WIRE SOLDER

Keren — Mon, 28 Feb 2022 10:19:36 +0000

DESCRIPTION
CX18 is a no clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes.
Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without
the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

STANDARD AVAILABILITY
CX18 is available in multiple lead-free alloys. Additional alloys and diameters may be available upon request.

APPLICATION
Best results are obtained with a properly sized solder iron tip at a temperature between 300° – 400°C (575° – 750°F) for leaded alloys and 370° – 425°C (700° – 800°F) for lead-free alloys. If additional flux is required AIM NC280 liquid flux or NC217 gel flux are recommended.

CLEANING
CX18 can be cleaned with commercially available flux removers. IPA is not recommended. Contact AIM for specific information.

SAFETY
Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.

The post CX18 NO CLEAN CORED WIRE SOLDER appeared first on ASI Technologies.

RX18 NO CLEAN CORED WIRE SOLDER

Keren — Mon, 28 Feb 2022 09:41:07 +0000

RX18 no clean flux core wire solder was developed to provide excellent soldering results with all alloys and surface finishes.

Engineered for robotic soldering, RX18 promotes thermal transfer, fast wetting and rapid solder penetration into plated through holes or surface mount interconnections.

RX18 specialized packaging ensures consistent, accurate, jam-free wire feeding.

RX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements and do not require cleaning.

The post RX18 NO CLEAN CORED WIRE SOLDER appeared first on ASI Technologies.

AIM | No-Clean Cored Wire, CX18, New!

kramer.niels — Mon, 13 Apr 2020 16:22:29 +0000

CX18 is a no-clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula that promotes thermal transfer, fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

Features:

Fast Wetting
Minimal/Clear Residue
Extends Solder Tip Life
ROL0 per IPC J-STD-004
REACH and RoHS Compliant*
Low Odor / Fumes
Halogen-Free per EN14582

The post AIM | No-Clean Cored Wire, CX18, New! appeared first on ASI Technologies.

AIM | RMA Cored Wire

zivit.drori — Wed, 30 May 2018 15:24:03 +0000

RMA is a mildly activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints. RMA wire will leave slight to moderate post-process residues that may be left on noncritical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning. IPC flux classification for this material is ROL0.

Features:

Good Activity Level
Mildly Activiated Flux
Good Wetting Properties
Good Thermal Transfer
Glycol-Free
Available in Industry Standard Sizes

The post AIM | RMA Cored Wire appeared first on ASI Technologies.