Cutters & Shears - ASI Technologies

Piergiacomi | PG SHEARS – CS30/1 – Cutter

sharon — Sun, 22 Mar 2020 17:20:36 +0000

Piergiacomi PG multi-use SHEARS- CSP 30/1 Cutter: Very strong multi-use tool. It can be used as: Shears, Multi-diameter Wire stripper, pliers.

ESD-safe handles version available
P/N 51355

The post Piergiacomi | PG SHEARS – CS30/1 – Cutter appeared first on ASI Technologies.

Piergiacomi | PG SHEARS – CS30 – Cutter

sharon — Sun, 22 Mar 2020 17:09:52 +0000

Piergiacomi CS 30 L Cutter: Easy to handle shears, designed for use in electronics but also used for the most desperate tasks. Similar to CS 30 but longer. Steel thickness 3.0mm

ESD-safe handles version available.
P/N 51351

The post Piergiacomi | PG SHEARS – CS30 – Cutter appeared first on ASI Technologies.

Piergiacomi | PG TR 30V – Cutter, oblique or vertical cut

sharon — Sun, 22 Mar 2020 15:36:17 +0000

Piergiacomi TR 30 V Cutter for oblique or vertical cut: Tool for a front, clean, flush cut. The special 60° angle permits the tool to be easily used in difficult to reach areas.
Steel thickness 3.0 mm. Tool length 144 mm

ESD- safe handles version available

P/N 51373 / 51374

The post Piergiacomi | PG TR 30V – Cutter, oblique or vertical cut appeared first on ASI Technologies.

Piergiacomi | PG 2550 – Cutter, flush cut

sharon — Sun, 22 Mar 2020 15:02:06 +0000

Piergiacomi TR 2550 Cutter: Tool for a flush cut, with inclined 50° blades, for specific work in electronics.
Steel thickness 2.5mm. Tool length 135mm.

ESD-safe handles version available.

P/N 51370

The post Piergiacomi | PG 2550 – Cutter, flush cut appeared first on ASI Technologies.

Piergiacomi | TRR 58 – Cutter, chamfered cut

kramer.niels — Wed, 11 Mar 2020 12:51:03 +0000

Piergiacomi TR 58 R: Tool for a flush cut. The special treatment of the blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order code TR 58 R A). Safety clip type AL. Steel thickness 3.0mm. Tool length 138mm.

ESD-safe handles version available

P/N 51365

The post Piergiacomi | TRR 58 – Cutter, chamfered cut appeared first on ASI Technologies.

Piergiacomi | TR 5000 R – Cutter, flush cut

sharon — Tue, 10 Mar 2020 04:16:31 +0000

Piergiacomi TR 5000 R: Strong tool for a flush cut. Safety clip for holding wire scraps securely after cutting available (order code TR 5000 R A). Safety clip type AF. Steel thickness 5.0mm. Tool length 138mm

ESD-safe handles version available

P/N 51372/51360 /51361/ 51362

The post Piergiacomi | TR 5000 R – Cutter, flush cut appeared first on ASI Technologies.

Piergiacomi | TRR 58 G – Cutter, flush cut

sharon — Tue, 10 Mar 2020 03:03:34 +0000

Piergiacomi TRR 58 G: Very strong tool for a flush cut, suitable, apart from work in electronics, also to be used in the jewellery’s and for the cutting of rubber seal. Steel thickness 3.0mm. Tool length 160mm

ESD-safe handles version available

Barcode Number: 51371

The post Piergiacomi | TRR 58 G – Cutter, flush cut appeared first on ASI Technologies.

Piergiacomi | TR 25 P – Cutter,flush cut

sharon — Mon, 09 Mar 2020 18:17:59 +0000

Piergiacomi TR 25 P Cutter: Tool for a flush cut. With very sharp cutting edges, it is ideal for very delicate work in electronics, allowing access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order code TR 25 P A). Safety clip type AF. Steel thickness 2.5mm. Tool length 132mm.

ESD-safe handles version available

P/N 51368/ 51369

The post Piergiacomi | TR 25 P – Cutter,flush cut appeared first on ASI Technologies.

Piergiacomi | TR 25 – Cutter, Flush cut

sharon — Mon, 09 Mar 2020 17:24:22 +0000

Piergiacomi TR 25 Cutter: Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order code TR 25 A). Safety clip type AF. Steel thickness 2.5mm. Tool length 138mm.

ESD-safe handles version available
P/N 51366 / 51366

The post Piergiacomi | TR 25 – Cutter, Flush cut appeared first on ASI Technologies.

Piergiacomi | TR 20 M – Cutter, flush cut

sharon — Mon, 09 Mar 2020 15:16:31 +0000

Piergiacomi TR 20 M Cutter: Tool for a flush cut. The reduced head’s dimension and its pointed shape, allow access to difficult to reach areas. Steel thickness 2.0 mm. Tool length 132mm. Safety clip for holding wire scraps securely after cutting available (order code TR 20 M A). Safety clip type AF.

ESD-safe handles version available
P/N 51364

The post Piergiacomi | TR 20 M – Cutter, flush cut appeared first on ASI Technologies.

Piergiacomi | TR E03 NB – Cutter, flush cut

sharon — Mon, 09 Mar 2020 12:30:12 +0000

Piergiacomi TRE 03 NB Cutter: Tool for a flush cut. Purposely designed as the simplified version of the TR 25 but with the same main characteristics. Safety clip for holding wire scraps securely after cutting available (order code TRE 03 NB A). Safety clip type AF. Steel thickness 2.5mm. Tool length 138mm.

ESD-safe handles version available.

P/N 51363

The post Piergiacomi | TR E03 NB – Cutter, flush cut appeared first on ASI Technologies.