Reflow ovens - ASI Technologies

Neoden | T-8 Reflow Oven

zivit.drori — Mon, 04 Jun 2018 08:37:29 +0000

T-8 reflow oven works with hot wind to solder PCB, support most normal components, LED and different kinds of IC.
The Crawler-type structure matches with eight heating zones and can make inside temperatures more accurate and well-proportioned Working temperature is reached in just 15-20min.
An AC motor is used to drive the conveyor belt. Speed adjustment are controlled by an automatic electronic analog switch, with sensitivity no more than 1 degree, control accuracy ±10mm/min.

zivit.drori — Mon, 04 Jun 2018 08:36:15 +0000

T-5S reflow oven works with hot wind to solder PCB, support most normal components (if soldering IC, we recommend to use T5/T8).
The Crawler-type structure matches with five heating zones (3 up/2 down) and can make inside temperatures more accurate and well-proportioned. Working temperature is reached in just 15-20min.
An AC motor is used to drive the conveyor belt. Speed adjustment is controlled by an automatic electronic analog switch, with a sensitivity level of no more than 1 degree, control accuracy ±10mm/min.

zivit.drori — Mon, 04 Jun 2018 08:34:47 +0000

T-5 reflow oven works with hot wind to solder PCB, support most normal components, LED and different kinds of IC.
The Crawler-type structure matches with five heating zones (3 up/ 2 down) and makes inside temperature more accurate and well-proportioned. The working temperature is reached within 15 to 20 minutes.
An AC motor is used to drive the conveyor belt. Speed adjustments are controlled by an automatic electronic analog switch, with a sensitivity of no more than 1 degree, control accuracy ±10mm/min.

P/N 62382