Stencil Cleaning - ASI Technologies

MB Tech | N29HV Stencil Cleaning

ASI Specialist — Mon, 29 Aug 2022 08:26:09 +0000

In order to meet your high-quality cleaning requirements for all parts, related to printing application (stencils,squeegees and misprints), while offering high productivity, the N29HV is the efficient and innovative solution.

Specially designed around a patented filtration system providing high cleaning performance, parts are first immersed into a wash tank where they undergo an efficient but gentle ultrasonic cleaning action.

In option wash tank can be fitted with a patented spray under immersion combining action of a vertical shaking with a turbulent bubbly air flow that allows reaching a high efficiency level. Parts are then transferred into a closed loop DI Water rinsing and are finally dried during a specific dripping stage and then a unique vacuum drying process.

The use of an aqueous product (No flash point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

Simplicity and Flexibility:

Fast locking stencil, squeegees or PCB holders/racks
Automatic transfer system
Rack storage on loading/unloading conveyors
Up to 12 stencils per hour!!!
Equipment and Process fully monitored
No operator supervision
SPC and/or Traceability in option

The post MB Tech | N29HV Stencil Cleaning appeared first on ASI Technologies.

Gen3 | Gensonic Stencil cleaning

kramer.niels — Sun, 12 Jul 2020 17:56:07 +0000

The award winning Gensonic Stencil Cleaning system is the definitive stencil cleaning system. Using a 40kHz on-contact ultrasonic transducer for high efficiency cleaning of stencil apertures, It can be used either in conjunction with Gen3’s Stencil Cleaning Centre’s or portable enough to be taken directly to the printer.

Screen printed solder pastes tend to compact and trap particles into aperture corners and Lead-Free solder pastes, that are less dense, tend to demonstrate this tendency even more.

To clean effectively requires both cleaning chemistry and mechanical agitation. Direct Ultrasonic Contact cleaning is the ultimate way to clean SMT stencils. Employing a 40kHz ultrasonic generator, the single transducer head cleans with great efficiency even in tougher applications such as partially set glues.

Safe and simple to use
A typical 3-minute cleaning cycle
No risk of stencil damage
Suitable for stainless steel and plastic stencils
No risk of stencil damage
Cleans solder paste or SMD Adhesives
Accepts both foils or framed stencils

The post Gen3 | Gensonic Stencil cleaning appeared first on ASI Technologies.

MB Tech | N29 AUTO Automatic Stencil Cleaning

kramer.niels — Mon, 10 Sep 2018 09:05:26 +0000

In order to meet your daily SMT adhesive or solder paste stencil cleaning requirements, even for frameless stencils, the N29AUTO machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is introduced into the loading cell of the equipment and automatically immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. Following the cleaning cycle the stencil automatically rises, passing through an air knife. It is then dried into the loading cell. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flash-point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N29 AUTO Automatic Stencil Cleaning appeared first on ASI Technologies.

MB Tech | N29SA4 Stencil Cleaning

kramer.niels — Mon, 10 Sep 2018 08:56:00 +0000

In order to meet your daily SMT adhesive or Solder paste stencil cleaning requirements, even for frameless stencils, the N29 SA4 machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flash-point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N29SA4 Stencil Cleaning appeared first on ASI Technologies.

MB Tech | N29 ECO Stencil Cleaning

kramer.niels — Mon, 10 Sep 2018 08:37:13 +0000

MB Tech, design and manufacture cleaning equipment that meets the highest standards of the Semiconductor and Electronic Industries.

The N29 ECO is Stencil Cleaner is specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flashpoint, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N29 ECO Stencil Cleaning appeared first on ASI Technologies.

MB Tech | N20 Stencil Cleaning

kramer.niels — Mon, 10 Sep 2018 08:02:24 +0000

In order to meet your daily SMT adhesive or Solder paste stencil cleaning requirements, even for frameless stencils, the N20 machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flash-point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N20 Stencil Cleaning appeared first on ASI Technologies.