• Curie Heat Technology operating at 470KHz.
• Max flexibility, allows the use of K, P, S Series tips.
• Extremely compact, weighs just 0.67KG (1.5LBS) .
• Sleep Workstand provides auto tip sleep feature
• No calibration or operator training required.
• No additional coil assembly costs.

The post Soldering Station TMT-1000S | Thermaltronics appeared first on ASI Technologies.

• 6-Axis Soldering/Dispensing Platform
• Full vision mapping & Fiducial Marks
• Laser Height Measurement
• Curie Heat Technology provides precise temp. control
• Dynamic Compensation for board variance
• Fume extraction Kit
• Flux & Solder Paste dispensing (Optional)
• Nitrogen Protection (Optional)

The post Thermaltronics | TMT-R8000S Soldering Robot appeared first on ASI Technologies.

• 8-Axis Soldering/Dispensing Platform
• Full vision mapping & Fiducial Marks
• Laser Height Measurement
• Curie Heat Technology provides precise temp. control
• Flux & Solder Paste dispensing
• Intelligently compensates for PCBA variance
• Fume extraction
• PCB Loader w/Preheater (Optional)

The post Thermaltronics | TMT-R9900S IN-LINE Soldering Robot appeared first on ASI Technologies.

• Dual ports with simultaneous heat up.
• High thermal recovery & performance.
• 470KHz power supply with built-in LCD display.
• No calibration or operator training required.
• No additional coil assembly costs.

The post Thermaltronics | TMT-2200S Soldering & Rework Station appeared first on ASI Technologies.

The post Thermaltronics | SPG-50 Yellow Sponge appeared first on ASI Technologies.

P/N BC-10

The post Thermaltronics | Brass Curls 10 Pack appeared first on ASI Technologies.

P/N DS-KIT-3

The post Thermaltronics | DS-KIT3 Desoldering Kit for use on the TMT-2000S appeared first on ASI Technologies.

• Dual Arm, Six Axis Soldering Robot
• Intelligently compensates for PCBA variance
• Image Recognition & Mapping System
• Laser Height Measurement
• Uses Curie Heat Technology for precise temperature control

TMT-R9800S FEATURES

1. Unlike typical Cartesian robots the Thermaltronics TMT-R9800S Soldering Robot, is equipped with full vision (eyes) to verify the procedure being undertaken and does not simply follow a pre-determined program. The soldering robot has an observation mode, a verification mode and decision making capabilities (brain). This capability of collecting and utilizing data for production processing is one of the most important factors necessary to meet the requirements of Industry 4.0 standards.
2. Through the use of servo motors and precision ballscrews, the Thermaltronics Robot system is able to accurately meet the requirements of high speed operation, repeatability and durabilityץ
3. Application programming is made simple by using full image-merging and mapping techniques.
4. Dynamic laser height measurement/adaptive control, ensures precision soldering repeatability.
5. A full vision mapping and matching system, provides for intelligent decision making during procedural operations.

P/N TMT-R9800S-2

The post Thermaltronics | TMT-R9800S Soldering Robot appeared first on ASI Technologies.

• Uses Thermaltronics MTZ Series Tweezers Tips.
• Dual lockable arms.
• Adjustable alignment of tips in x-y directions

The post Tweezers | TZ-KIT1 Thermaltronics appeared first on ASI Technologies.

• Removes tip oxidation
• No-Clean compatible formulation
• Minimal residues
• Rapidly re-tins badly oxidized soldering iron tips

Thermaltronics TMT-TC-2 Tip Tinners should be used when the soldering iron tip is unable to be re-tinned by using cored solder or normal electronic grade fluxes.
For best results roll or wipe the soldering tip at normal soldering temperature over the surface of the TMT-TC-2 for a few seconds to produce local melting. There is no need to use heavy pressure or a scrubbing action. Prolonged contact may form excessive fume.
The residue on the tip is non-corrosive and may be removed by wiping the tip onto brass curls or a damp (not wet) sponge.

Thermaltronics TMT-TC-2 Tip Tinners are available in containers containing 20g.

P/N TMT-TC-2

The post Thermaltronics | Tip Tinners appeared first on ASI Technologies.

• Removes tip oxidation
• Light & compact, takes up minimal benchtop space
• Easy to clean and maintain

P/N TMT-ASTC100

The post Thermaltronics | מנקה ראש הלחמה אוטומטי appeared first on ASI Technologies.

• High thermal recovery & performance.
• 56MHz power supply with built-in LCD display.
• Dual switchable soldering ports.
• No calibration or operator training required.
• No additional coil assembly costs.

P/N  TMT-9000S-2

The post Thermaltronics | TMT-9000S appeared first on ASI Technologies.

• Curie Heat Technology operating at 470KHz.
• Maximum flexibility, allows the use of K, P and S Series tips.
• Extremely compact, weighs just 1.3KG.
• No calibration or operator training required.
• No additional coil assembly costs.

P/N   TMT-2000S-K

The post תחנת הלחמה | Thermaltronics TMT-2000S appeared first on ASI Technologies.

• Fast heating and temperature recovery
• Simple controls allows easy adjustment
• Uses HTN Series Hot Air Nozzles
• Digital display with easy-to-adjust temp and airflow

P/N TMT-HA600-2

The post Thermaltronics | TMT-HA600 Hot Air Tool appeared first on ASI Technologies.

• Digital display shows temperature and status.
• Airflow meter provides visual feedback of air flow.
• Large selection of high quality nozzles.

Adjustable, easy to use temperature and air control knobs

P/N TMT-HA300

The post Thermaltronics | TMT-HA300 Hot Air Tool appeared first on ASI Technologies.

• ESD safe design with integrated ground
• Specialized for work on precision components.
• Uses HAP Series Hot Air Pencil Nozzles
• High quality heating element ensures fast heat up and long heater life

P/N   TMT-HA100

The post Thermaltronic | TMT-HA100 Hot Air Pencil appeared first on ASI Technologies.

• Uses Thermaltronics MDT Series Desoldering Tips.
• High thermal recovery & performance.
• Easy and simple maintenance.

P/N DS-KIT-1

The post Thermaltronics | DS-KIT1 Desoldering Kit for use on the TMT-9000S appeared first on ASI Technologies.