Specially designed around a patented filtration system providing high cleaning performance, parts are first immersed into a wash tank where they undergo an efficient but gentle ultrasonic cleaning action.

In option wash tank can be fitted with a patented spray under immersion combining action of a vertical shaking with a turbulent bubbly air flow that allows reaching a high efficiency level. Parts are then transferred into a closed loop DI Water rinsing and are finally dried during a specific dripping stage and then a unique vacuum drying process.

The use of an aqueous product (No flash point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

Simplicity and Flexibility:

• Fast locking stencil, squeegees or PCB holders/racks
• Automatic transfer system
• Rack storage on loading/unloading conveyors
• Up to 12 stencils per hour!!!
• Equipment and Process fully monitored
• No operator supervision
• SPC and/or Traceability in option

The post MB Tech | N29HV Stencil Cleaning appeared first on ASI Technologies.

Specially designed to enhance ATRON® SP200, MC200 is based on spray in air technology. Parts are placed into a stainless steel basket, and submitted to the superior cleaning performance of high pressure sprayer. They are perfectly cleaned in just a few minutes. Then follow a spray in air rinsing step in open loop (closed loop in option) that can be done with tap or deionized water. Finally the parts are dried with a high flow hot air drying system. The use of an aqueous product (no flash-point, low VOC content), ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | MC200+ Maintenance Cleaning Equipment appeared first on ASI Technologies.

The post MB Tech | MC200 Maintenance Cleaning Equipment appeared first on ASI Technologies.

The post MB Tech | N29 AUTO Automatic Stencil Cleaning appeared first on ASI Technologies.

The post MB Tech | N29SA4 Stencil Cleaning appeared first on ASI Technologies.

The N29  ECO is Stencil Cleaner is specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flashpoint, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

The post MB Tech | N29 ECO Stencil Cleaning appeared first on ASI Technologies.

The post MB Tech | N20 Stencil Cleaning appeared first on ASI Technologies.

Developed to meet the highest requirements in terms of quality and ionic contamination, MB Tech’s immersion process offers a concrete alternative to the ultrasonic cleaning (often forbidden on electronic boards) and to the spray in air cleaning (that often generates shadowing effect).

SUI (Spray under Immersion) technology offers a complete immersion of the cleaning elements, thus eliminating any possible shadowing effect.

With a patented filtration and a closed-loop rinsing process, the NC25 range will allow you to perform high precision cleaning at the lowest running costs.

The NC25 is available in 2 versions adapted to your production volume:

• The NC25 Eco – for small to medium volumes
• The NC25 – for medium to large volumes.

The post MB Tech | NC25 PCBA Cleaning appeared first on ASI Technologies.