Home › Production Equipment › Nitrogen Generators › ASI-MN2 Series
ASI-MN2

Photo from the approved catalog (CAT-ASI-MN2 Rev. 01). Machines on a white background with the ASI logo.

ASI-MN2 Series

Modular PSA Nitrogen Generators

16 models, 2.2 to 60 Nm³/h at 99.999%, and up to 220 Nm³/h at 99%.

The ASI-MN2 series generates nitrogen on site from clean compressed air by pressure swing adsorption (PSA) on carbon molecular sieve, with two adsorption towers working alternately for a continuous supply. Every unit has a built-in N₂ buffer tank, PLC control, a continuous oxygen analyzer and a touch screen.

ASI_MN2-Series_CAT_Rev01_2026-11-16.pdf

16 modelsOne modular platform
2.2–60 Nm³/hN₂ flow at 99.999%
Up to 220 Nm³/hat 99%
Built-inN₂ buffer tank
220V200W, 50Hz

Key features

  • PSA with carbon molecular sieve, two towers
  • Purity from 99% to 99.999%
  • Built-in N₂ buffer tank in every model
  • Siemens PLC and continuous oxygen analyzer
  • Off-spec nitrogen vented automatically
  • Fault analysis and alarm, unattended operation
  • Anodized aluminum adsorption towers
  • Cloud platform connectable (mobile monitoring)
  • Touch screen with English interface
  • Modular, compact and mobile cabinets

Industry applications

The first nine uses are the applications named in the series catalog. They are followed by further on-site PSA nitrogen uses confirmed from external sources; these uses are not listed in the catalog. Application data are typical industry values, not a process guarantee.

Uses from the catalog

SMT reflow oven

From the catalog

SMT reflow soldering

Inert oven atmosphere reduces oxidation and improves wetting. Typically 99.9% to 99.99% N₂ (1000 to 100 ppm O₂), and 50 ppm or less for demanding work.

Wave soldering

From the catalog

Wave soldering

N₂ over the solder pot cuts dross and improves wetting. Typically 99.9% to 99.99% (about 100 ppm O₂).

Selective soldering

From the catalog

Selective soldering

N₂ shrouds the nozzle to keep the mini-wave clean and limit dross. Typically 99.99% to 99.999%.

Component storage

From the catalog

Component storage

Dry N₂ purge holds moisture-sensitive parts at 5% to 10% RH or less (IPC/JEDEC J-STD-033) and limits oxidation.

Laser welding

From the catalog

Laser cutting and welding

N₂ assist and shield gas gives bright, oxide-free edges. Typically 99.9% to 99.999%; cutting needs a booster for high pressure.

Metal 3D printing

From the catalog

Metal 3D printing

Inert build chamber protects the melt pool and powder. Typically 99.99% (100 ppm O₂ or less); argon for titanium.

Heat treatment

From the catalog

Heat treatment

N₂ furnace atmosphere prevents scaling and discoloration in annealing and brazing. Typically 95% to 99.999%.

Food packaging

From the catalog

Food packaging (MAP)

N₂ replaces oxygen in the pack to extend shelf life. Typically 99% to 99.9%.

Pharma packaging

From the catalog

Pharma and laboratories

Blanketing, inerting and packaging at 99% to 99.999%; LC-MS and sample evaporation at 95% to 99.5%.

Additional uses not listed in the catalog

Winery tanks

Additional use, not listed in the catalog

Wineries and wine production

Nitrogen is used to inert and blanket tanks to limit oxidation, and to sparge wine to reduce dissolved oxygen, including during transfer and bottling.

Beer tanks

Additional use, not listed in the catalog

Beer and beverages

Breweries and beverage plants use nitrogen for tank blanketing and headspace purging, and sometimes to add nitrogen to the drink, to limit oxygen exposure.

Fuel storage tanks

Additional use, not listed in the catalog

Oil and gas

Nitrogen is used for tank blanketing, pipeline purging, pressure testing and enhanced recovery, to provide an inert atmosphere and reduce moisture and oxidation.

Distillation columns

Additional use, not listed in the catalog

Chemical industry

Nitrogen blankets and inerts the headspace of storage and process tanks, to reduce fire risk and prevent oxidation of sensitive chemicals.

Aircraft tire work

Additional use, not listed in the catalog

Tire inflation

Dry nitrogen is used to inflate tires, especially on aircraft and heavy equipment, as a drier and more stable gas than compressed air.

Injection mold

Additional use, not listed in the catalog

Plastics injection molding

In gas-assisted injection molding and related processes, nitrogen is injected into the part; it is also used to blanket stored resin to limit oxidation and defects.

Application photo credits

The first nine photos were cropped from page 2 of the approved catalog (CAT-ASI-MN2 Rev. 01), originally from Wikimedia Commons; third-party brand marks had already been removed in the catalog. New-use photos were cropped to the same aspect ratio.

  • Reflow: 523david, CC BY-SA 4.0
  • Wave soldering: Space11111, CC BY-SA 4.0
  • Selective soldering: Pedro ximenez, CC BY-SA 3.0
  • Component storage: Filip Wahlberg, CC BY-SA 4.0
  • Laser: Barbara Nasiłowska, CC BY 4.0
  • Metal 3D printing: René Volfík, CC BY-SA 4.0
  • Heat treatment: Ichudov, CC BY-SA 3.0
  • Food packaging: Peggy Greb, Agricultural Research Service of the U.S. Department of Agriculture, public domain
  • Pharma: قناة التغيير, CC BY 3.0
  • Wineries: (WT-en) WineCountryInn, public domain
  • Beer and beverages: Michal Klajban, CC BY-SA 4.0
  • Oil and gas: Estormiz, CC0
  • Chemical industry: Luigi Chiesa, CC BY 3.0
  • Tire inflation: U.S. Air Force, Senior Airman Violette Hosack, public domain
  • Plastics injection: Bricetofly, CC0

Typical system line

1

Air compressor

0.7–1.0 MPa supply

2

Air tank

0.3 m³ recommended for ASI-MN2-5 and -8; other models on request

3

Refrigerated dryer

Removes water

4

3-stage filtration

Dust and oil removal

5

ASI-MN2 generator

Towers A / B and N₂ buffer tank

6

Point of use

Reflow, soldering, laser

Compressed air is dried and filtered before the ASI-MN2 separates N₂ in towers A / B; the built-in buffer tank feeds the point of use. Upstream equipment is not included.

N₂ output (Nm³/h) by purity

Model 99% 99.9% 99.99% 99.995% 99.999%
ASI-MN2-2.2 8.1 5.4 3.5 2.9 2.2
ASI-MN2-5 19.2 11.4 7.8 6.4 5
ASI-MN2-8 28.8 17 11.7 9.9 8
ASI-MN2-10 38 23 15 13 10
ASI-MN2-13 48 27 19 16 13
ASI-MN2-16 57 39 23 19 16
ASI-MN2-18 67 43 26 23 18
ASI-MN2-21 76 45 30 25 21
ASI-MN2-23 86 51 35 29 23
ASI-MN2-26 96 57 40 33 26
ASI-MN2-30 110 65 45 38 30
ASI-MN2-37 134 80 55 46 37
ASI-MN2-42 152 90 65 52 42
ASI-MN2-48 172 102 70 58 48
ASI-MN2-54 192 114 80 66 54
ASI-MN2-60 220 130 90 76 60

Ports, size and weight

Model N₂ outlet Air inlet L×W×H mm kg
ASI-MN2-2.2 Φ8 Φ16 580×500×1690 140
ASI-MN2-5 Φ8 Φ16 745×500×1690 200
ASI-MN2-8 Φ8 Φ16 907×500×1690 280
ASI-MN2-10 Φ8 Φ16 1070×500×1690 340
ASI-MN2-13 Φ8 G3/4 1230×500×1690 410
ASI-MN2-16 Φ12 G3/4 1390×500×1690 480
ASI-MN2-18 Φ12 G3/4 1560×500×1690 560
ASI-MN2-21 Φ12 G1 1720×500×1690 620
ASI-MN2-23 Φ16 G1 1880×500×1690 710
ASI-MN2-26 Φ16 G1 2040×500×1690 830
ASI-MN2-30 Φ16 G1-1/4 2200×500×1850 900
ASI-MN2-37 Φ16 G1-1/4 1710×990×1690 1230
ASI-MN2-42 Φ16 G1-1/2 1870×990×1690 1450
ASI-MN2-48 G3/4 G1-1/2 2030×990×1690 1600
ASI-MN2-54 G3/4 G1-1/2 2190×990×1690 1800
ASI-MN2-60 G3/4 G1-1/2 2350×990×1850 2000

Common data for all models

Feed gas Clean compressed air, 0.7–1.0 MPa (optimum about 0.8 MPa)
Air quality ISO 8573-1:2010 class 1-4-1; dew point ≤ 2–10 °C; oil ≤ 0.01 mg/m³
Air demand > 0.6 Nm³/min (ASI-MN2-5); > 1 Nm³/min (ASI-MN2-8); other models on request
Outlet pressure 0.6 MPa (ASI-MN2-5 and -8, with 0.1 MPa drop at the inlet); other models on request
N₂ buffer tank Built-in in every model; no extra N₂ tank required
Monitoring Flow meter (L/min), continuous oxygen analyzer (ppm), N₂ sampling port
Control system Siemens PLC, pneumatic program valves, touch screen (English)
Power supply 220V / 200W / 50Hz
Site 10–35 °C, clean, dry and ventilated; 0.5 m clearance above the unit; ratings at altitude 0 m
Required upstream equipment (not included) Air compressor, air tank, refrigerated dryer, three-stage filtration, then the generator
Air tank 0.3 m³ recommended for ASI-MN2-5 and -8; other models on request
Maintenance, filters Air filter element 4000 h; precision filters 4000–8000 h; N₂ filter element 1 year
Maintenance, wear parts Silencers (2) 1–2 years; pressure relief valves (2) 2 years; activated carbon 5–10 years
Ordering Model ASI-MN2-: modular nitrogen generator; = Nm³/h at 99.999% (see model table)

Specifications are subject to change without notice. Document CAT-ASI-MN2, Rev. 01, 16 Nov 2026.

Looking for the most suitable solution? Contact our experts

ASI_MN2-Series_CAT_Rev01_2026-11-16.pdf

צוות המומחים שלנו ישמח לעמוד לשירותכם
לייעוץ ומידע נוסף השאירו פרטים: